I normally use unlock.exe to unlock a locked file, copy over the new one, then reboot.

Cheers,

Paul

On Fri, 12 Mar 2021, 05:46 Massimo S., <ecs-isp@2rosenthals.com <mailto:ecs-isp@2rosenthals.com>> wrote:



    Il 27/02/2021 22:32, Paul Smedley ha scritto:
     > Hi again,
     >
     > On 28/2/21 7:56 am, Paul Smedley wrote:
     >> Hi Max,
     >>
     >> On 28/2/21 7:38 am, Massimo S. wrote:
     >>>
     >>>
     >>> Il 27/02/2021 21:46, Paul Smedley ha scritto:
     >>>> Hi Max,
     >>>>
     >>>> On 28/2/21 7:08 am, Massimo S. wrote:
     >>>>> here i've tested apache 2.4.41 and 5.6.40 and they seems to work
     >>>>> only php have some issue since it lacks all the DLL (there is only modphp)
     >>>> Sorry - I have no idea what you mean when you say it lacks all the DLL?
     >>>
     >>> i mean modules e.g. mysqli.dll ...
     >>>
     >>>> You need:
     >>>> https://smedley.id.au/tmp/php-5.6.40-os2-20201213.zip
     >>>  >
     >>>> https://smedley.id.au/tmp/modphp5-5.6.40-apache24.zip
     >>>>
     >>>> The 5.6.40 from December didn't include an apache 2.4 module...
     >>>
     >>> ah, ok
     >>> so i will wait for a 5.6.40 for apache 2.4.x with modules
     >>>
     >>> thanks a lot
     >> No - all you need is the contents of the two zips. I have no intent of spending more time combining the
     >> contents of these two - when I would expect that nobody else would be considering still running php
    5.6.40.
     >> These rebuilds were essentially purely for your use.
     >>
     >>>> apache 2.4.46 should be trivial... it was onn my list to rebuild 2.4.x with the latest openssl anyway...
     >>
     >> 2.4.46 is in fact already available - https://smedley.id.au/tmp/httpd-2.4.46-os2-20201213.zip
     >>
     >> rebuilding it now with the latest openssl
     >
     > https://smedley.id.au/tmp/httpd-2.4.46-os2-20210228.zip
     >
     > Cheers,
     >
     > Paul


    hi all,

    i'd need to upgrade UCONV.DLL but the DLL is locked
    if i boot the server from ALT f1-f2 it freeze (never happened before)
    on boot at "Installed OS2LVM.DMD" :-(

    any help?

    thanks

    massimo

    =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
    This message is sent to you because you are subscribed to
       the mailing list <ecs-isp@2rosenthals.com <mailto:ecs-isp@2rosenthals.com>>.
    To unsubscribe, E-mail to: <ecs-isp-off@2rosenthals.com <mailto:ecs-isp-off@2rosenthals.com>>
    To switch to the DIGEST mode, E-mail to <ecs-isp-digest@2rosenthals.com
    <mailto:ecs-isp-digest@2rosenthals.com>>
    To switch to the INDEX mode, E-mail to <ecs-isp-index@2rosenthals.com <mailto:ecs-isp-index@2rosenthals.com>>
    Send administrative queries to  <ecs-isp-request@2rosenthals.com <mailto:ecs-isp-request@2rosenthals.com>>
    To subscribe (new addresses), E-mail to: <ecs-isp-on@2rosenthals.com <mailto:ecs-isp-on@2rosenthals.com>>
    and reply to the confirmation email.
    Web archives are publicly available at: http://lists.2rosenthals.com

    This list is hosted by Rosenthal & Rosenthal, LLC
    P.O. Box 281, Deer Park, NY 11729-0281. Non-
    electronic communications related to content
    contained in these messages should be directed
    to the above address. (CAN-SPAM Act of 2003)

    =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=