From: "Massimo S." <ecs-isp@2rosenthals.com>
Reply-To: ml@ecomstation.it
Subject: Re: [eCS-ISP] apache 2.4.x and php 5.6.40 and UCONV.DLL issue
To: eCS ISP Mailing List <ecs-isp@2rosenthals.com>
References: <list-1741552@2rosenthals.com>
Organization: eComStation dot it
Message-ID: <c17fd7ec-4f9e-24d5-b4ad-c38f3753a22f@ecomstation.it>
Date: Sat, 13 Mar 2021 20:10:58 +0100
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; it-IT; rv:1.7.13) Gecko/20060424
 Thunderbird/1.0.8 Mnenhy/0.7.4.0
MIME-Version: 1.0
In-Reply-To: <list-1741552@2rosenthals.com>
Content-Type: text/plain; charset=iso-8859-15; format=flowed
Content-Language: it-IT
Content-Transfer-Encoding: 7bit



Il 12/03/2021 22:38, Steven Levine ha scritto:
> In <list-1740673@2rosenthals.com>, on 03/12/21
>     at 10:32 AM, "Massimo S." <ecs-isp@2rosenthals.com> said:
> 
> Hi Massimo,
> 
>> going to see if there are some difference in the storage drivers maybe
>> something has changed
> 
> This might be a timing issue triggered by the difference between an Alt-F1
> boot and a normal boot.
> 
> I recommend you run the lastest testlog and see if it reports any
> config.sys ordering issues.
> 
> Is OS2LVM.DMD the last DMD loaded in your config.sys?  It often is and, if
> so, this would also makes it the last BASEDEV loaded.
> 
> When you get a hang after loading the last BASEDEV, it usually indicates a
> problem fully enabling the protect mode drivers that were loaded as
> BASEDEVs.  Unfortunately there are lot of seemingly minor configuration
> issues that can cause this kind of hang.
> 
> David's testlog and Doug Bissett's lcss are good tools for verifying and
> optimizing your config.sys.
> 
> Steven

Thanks Steven, but luckily i fixed it
maybe some update of PSD=ACPI.PSI put the switch /VBE
instead for my HW configuration i need /VW switch
(due to LSI megaraid sata2 controller)

now alt-f1 f2 go to command prompt without any isse

massimo