From: |
"Steven Levine" <ecs-isp@2rosenthals.com> |
Full Headers Undecoded message |
Subject: |
Re: [eCS-ISP] help about an Injoy FW rule |
Date: |
Sun, 17 Mar 2024 15:02:11 -0700 |
To: |
"eCS ISP Mailing List" <ecs-isp@2rosenthals.com> |
|
---|
In <list-9315224@2rosenthals.com>, on 03/17/24
at 07:50 PM, "Massimo S." <ecs-isp@2rosenthals.com> said:
Hi Massimo,
>the firewall in that condition do not reach the internet so each 30
>minutes the fault daemon gives a reboot
OK. The be clear, ijfw is not reaching the internet because gateway.exe
is shutting itself down and you are running with
device-fxwrap,sys /S
in config.sys?
>assist_rem_srv6_in
> Destination-Port = "55000",
> Source = "1.2.3.4",
> Destination = "My_IP",
> Rule-Action = Portmap,
> Mapping-Dest-IP = "192.168.1.8",
> Mapping-Dest-Port = 3389
>assist_rem_srv6_out Rule-Status = Disabled
> Source-Port = "3389",
> Source = "192.168.1.8",
> Rule-Action = Portmap,
> Mapping-Dest-Port = 65488
>ext_m_in
> Destination-Port = "55000",
> Source = "1.2.3.5",
> Source-Netmask = 255.255.255.254,
> Destination = "My_IP",
> Rule-Action = Portmap,
> Mapping-Dest-IP = "192.168.1.8",
> Mapping-Dest-Port = 3389
>ext_m_out
> Source-Port = "3389",
> Source = "192.168.1.8",
> Rule-Action = Portmap,
> Mapping-Dest-Port = 55000
What happens if you disable the ext_m_in rule and enable the
assist_rem_srv6_in rule? Does gateway.exe run without dieing?
>i guess the issue that create problems is the one "assist_rem_srv6_in"
If that's the only rule you added, this is probably true.
>> Have you checked if the recently announced ijfw 4.2.3 release has any
>> effect on his failure?
>still not
OK. I recommend you give it a try. I recommend using the .zip file and
just replacing the binaries (*.exe, *.dll and *.sys). The rest of the
files are unchanged, so your existing rules and configuration files should
works as is.
Steven
--
----------------------------------------------------------------------
"Steven Levine" <steve53@earthlink.net> Warp/DIY/BlueLion etc.
www.scoug.com www.arcanoae.com www.warpcave.com
----------------------------------------------------------------------
|