Mensaje archivado #774 de la Lista ecs-isp@2rosenthals.com | ![]() ![]() |
|
---|
In<list-9315224@2rosenthals.com>, on 03/17/24
at 07:50 PM, "Massimo S."<ecs-isp@2rosenthals.com> said:
Hi Massimo,
the firewall in that condition do not reach the internet so each 30OK. The be clear, ijfw is not reaching the internet because gateway.exe
minutes the fault daemon gives a reboot
is shutting itself down and you are running with
device-fxwrap,sys /S
in config.sys?
assist_rem_srv6_inWhat happens if you disable the ext_m_in rule and enable the
Destination-Port = "55000",
Source = "1.2.3.4",
Destination = "My_IP",
Rule-Action = Portmap,
Mapping-Dest-IP = "192.168.1.8",
Mapping-Dest-Port = 3389
assist_rem_srv6_out Rule-Status = Disabled
Source-Port = "3389",
Source = "192.168.1.8",
Rule-Action = Portmap,
Mapping-Dest-Port = 65488
ext_m_in
Destination-Port = "55000",
Source = "1.2.3.5",
Source-Netmask = 255.255.255.254,
Destination = "My_IP",
Rule-Action = Portmap,
Mapping-Dest-IP = "192.168.1.8",
Mapping-Dest-Port = 3389
ext_m_out
Source-Port = "3389",
Source = "192.168.1.8",
Rule-Action = Portmap,
Mapping-Dest-Port = 55000
assist_rem_srv6_in rule? Does gateway.exe run without dieing?
i guess the issue that create problems is the one "assist_rem_srv6_in"If that's the only rule you added, this is probably true.
OK. I recommend you give it a try. I recommend using the .zip file andHave you checked if the recently announced ijfw 4.2.3 release has anystill not
effect on his failure?
just replacing the binaries (*.exe, *.dll and *.sys). The rest of the
files are unchanged, so your existing rules and configuration files should
works as is.
Steven
Suscribirse: Todos,
Compendio,
Indice. Desuscribirse Correo al dueño de la Lista |