On Wed, 3 Sep 2008 09:56:56 -0700, Jon Harrison wrote:
>> Do you have a USB Mouse and USB keyboard attached?
>
>Andy:
>
>It's just the mouse, no other devices plugged in. On the T61 I use the port
>on the right side, top port. I haven't checked lately, but a few months ago
>with rc4 I found that I had hang problems on bootup if I used the lower port
>on the right whereas the upper port booted ok. I have not checked the other
>2 usb ports now that I have achieved the level of stability I currently
>have. I guess I need to check the different ports while booting and also
>changing ports after it is running.
>
>Jon
This may have nothing at all to do with it, but are you sure you have
enough USB definitions in the Config.Sys? I don't think there is much
downside to over defining. But, if you don't have enough lots of
strange failures can appear.
Because I also have a Docking Station that has an additional five
ports, I added several more definitions than I would normally have.
back to list