>Except for possibly one time, I do not recall the 'flashing'
>problem after the system has been idle for a while. When it does
>appear, it's usually after I've been using it for a while. One
>possible clue that just occurred to me: When the system has been
>idle, the air near the back left vents is usually cool. Right now,
>with the flashing having happened [and switched OFF/ON to get back
>to a solid light] a few minutes ago, the air coming from the vent
>is actually quite warm. Two points this makes to me [not a h/w
>type]:
>1) The fan is actually working.
>2) It could be an overheating problem.
>
I like to add a possible culprit to the mix, that could also explain
the overheating. From time to time my TPad R60 gets really hot and I begun
using a utility (cpuspeed 1.4) to throttle down my CPU. Judging from the
output of this utility I see that my CPU after some time is running at
100% and the program is not able to trottle the CPU down anymore, heavy
IRQ load.
I tested different versions of ACPI this weekend, with version 3.13
my WIFI led was flashing a lot and I also lost my connection. With
version 3.11 my WIFI led isn't flashing, but from time to time I still
have my CPU at 100%.
What version of ACPI are you using? (bldlevel \os2\dll\acpi32.dll will
tell you the version).
torna alla lista