Mailing List ecs-t6x@2rosenthals.com gearchiveerd bericht #359

Van: "Jon" <ecs-t6x@2rosenthals.com> Volledige berichtkoppen
Ongedecodeerd bericht
Onderwerp: Re: [eCS T60/T61] eCS 2.0 RC6a on T61
Datum: Sat, 21 Mar 2009 21:35:03 -0700 (PDT)
Aan: "eCS ThinkPad T60/61 Mailing List" <ecs-t6x@2rosenthals.com>

On Sat, 21 Mar 2009 16:52:28 -0600, Andy Willis wrote:

>All in all the system is quite useable out of the box.  No sound and the
>video not running in the preferred mode are the biggest issues so far.

Andy:

As Mark said, you need to put the sound commands into startup.cmd or run them some other way.  
Personally, I have system sounds off because of an occasional hiccup if left on.  You only need to
run those commands once since there is a command to save them.  Now I just run unimix with the
-loadc parameter.  BTW, those commands were first posted by Chuck.

My T61 is the widescreen model.  I am running Panorama at 1680x1050x16million.  I forget why I
changed from Snap to Panorama but Panorama works better for me.  I think it was a booting problem
where sometimes SNAP would take up to 5 minutes to start up.  I'd have to go back and check older
emails to remember exactly what the deal was.  My video is reported as GM965/PM965/GL960.

I gave up on eCenter, too many hangs and odd things now & then.  I use xCenter and rarely
experience a problem.  I also experienced problems if I have wLan active on startup, so I start
with the radio disabled and start it manually after booting.  This is how I've been doing it for
about a year now and with the changes I've made by going to Panorama, xCenter, & rc6a it may no
longer be necessary but I have not bothered to experiment.  

I'm using /smp /apic in my config.sys

My uniaud16 is v1.1.4 & uniaud32 is 1.9.8.  I tried uniaud32-20090125 and it trapped.  I haven't
tried uniaud114RC7.

Jon



Aanmelden: Feed, Samenvatting, Index.
Afmelden
Mail naar ListMaster