Mailing List ecs-t6x@2rosenthals.com gearchiveerd bericht #360

Van: "Paul Smedley" <ecs-t6x@2rosenthals.com> Volledige berichtkoppen
Ongedecodeerd bericht
Onderwerp: Re: [eCS T60/T61] eCS 2.0 RC6a on T61
Datum: Thu, 26 Mar 2009 19:40:34 +1030
Aan: ecs-t6x@2rosenthals.com

Hi Mark,

------- Original message -------
From: madodel <ecs-t6x@2rosenthals.com>
To: ecs-t6x@2rosenthals.com
Sent: 22.3.'09,  14:20

> Andy Willis wrote:
> > Overall very good results so far after installing RC6a on a T61.  The
> > wireless networking connected immediately upon final boot (to a
> > neighbor's open wireless network, I then setup a profile for my network
> > and it connected right up too).  Just connected the ethernet and it is
> > working as well.
> >  I selected the pcmcia as the T42 option and I just put in a modem card
> > and it was recognized immediately.
> > I had to select uniaud as the install didn't pick that up and I don't
> > hear anything.  I downloaded the latest version from Smedley's site and
> > still no sound.  I figure I'll uninstall and reinstall and see what I
> > get.  I thought it might just be that I can't hear it as sometimes that
> > is a problem but unimix doesn't give me any feedback at all, just
> > flashes away (no popuplog.os2 entries).  UnimixPM also will not launch
> > in the same fashion.  The drivers load fine though and look good in
> > Hardware Manager.  8086 284b -- 82801-ICH8
>
> Paul's latest HDA build works fine here on my T61, but I have to run a
> script (I think Lewis or Chuck gave to me) to initiate sound.
>
> @unimix.exe -id3 -cnt0 -val1 > nul
> @unimix.exe -id3 -cnt1 -val1 > nul
> @unimix.exe -id27 -val20 > nul
> @unimix.exe -saveH:\mmos2\unimix.ini > nul
> EXIT
>
> But no problem with running Unimix here so not sure if that will help you.
Can you please send me a uniinfo log from this machine prior to running unimix, and also one from after? Preferably with the debug build of uniaud 1.9.12?

also wondering if the headphone socket produces sound before you run unimix?

pasha found with latest uniaud on his desktop he needed to switch which socket his speakers were connected to - bit hard to do this on a t61 :)

cheers,

Paul

Aanmelden: Feed, Samenvatting, Index.
Afmelden
Mail naar ListMaster