From: "Andy Willis" <ecs-t6x@2rosenthals.com>
DomainKey-Signature: a=rsa-sha1; c=nofws;
        d=gmail.com; s=gamma;
        h=message-id:date:from:reply-to:user-agent:mime-version:to:subject
         :references:in-reply-to:content-type:content-transfer-encoding;
        b=InS+8f8zSgRABceudBlGMP/pCZIp+RFp9d9lKNWOnQlbdgD9dgMQX0nQTLWkQKh1Lq
         ZCkx/RYXdqaNYSVHbEfEBO1OccXEj0Hkl0/DdkOXS/jILpdr8smfdboiefBYtzQHq13d
         K9RE2cny97mO6I0iDNFguQ5XquueLej9nW+JM=
Message-ID: <49CB7E8C.1090306@gmail.com>
Date: Thu, 26 Mar 2009 07:09:32 -0600
Reply-To: abwillis1@gmail.com
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; rv:1.9.1b3pre) Gecko/20090216 SeaMonkey/2.0a3pre not(Firefox/3.2)
MIME-Version: 1.0
To: eCS ThinkPad T60/61 Mailing List <ecs-t6x@2rosenthals.com>
Subject: Re: [eCS T60/T61] eCS 2.0 RC6a on T61
References: <list-2375563@2rosenthals.com>
In-Reply-To: <list-2375563@2rosenthals.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit

Paul Smedley wrote:
> Hi Mark,
>
> ------- Original message -------
> From: madodel<ecs-t6x@2rosenthals.com>
> To: ecs-t6x@2rosenthals.com
> Sent: 22.3.'09,  14:20
>
>    
>> Andy Willis wrote:
>>      
>>> Overall very good results so far after installing RC6a on a T61.  The
>>> wireless networking connected immediately upon final boot (to a
>>> neighbor's open wireless network, I then setup a profile for my network
>>> and it connected right up too).  Just connected the ethernet and it is
>>> working as well.
>>>   I selected the pcmcia as the T42 option and I just put in a modem card
>>> and it was recognized immediately.
>>> I had to select uniaud as the install didn't pick that up and I don't
>>> hear anything.  I downloaded the latest version from Smedley's site and
>>> still no sound.  I figure I'll uninstall and reinstall and see what I
>>> get.  I thought it might just be that I can't hear it as sometimes that
>>> is a problem but unimix doesn't give me any feedback at all, just
>>> flashes away (no popuplog.os2 entries).  UnimixPM also will not launch
>>> in the same fashion.  The drivers load fine though and look good in
>>> Hardware Manager.  8086 284b -- 82801-ICH8
>>>        
>> Paul's latest HDA build works fine here on my T61, but I have to run a
>> script (I think Lewis or Chuck gave to me) to initiate sound.
>>
>> @unimix.exe -id3 -cnt0 -val1>  nul
>> @unimix.exe -id3 -cnt1 -val1>  nul
>> @unimix.exe -id27 -val20>  nul
>> @unimix.exe -saveH:\mmos2\unimix.ini>  nul
>> EXIT
>>
>> But no problem with running Unimix here so not sure if that will help you.
>>      
> Can you please send me a uniinfo log from this machine prior to running unimix, and also one from after? Preferably with the debug build of uniaud 1.9.12?
>
> also wondering if the headphone socket produces sound before you run unimix?
>
> pasha found with latest uniaud on his desktop he needed to switch which socket his speakers were connected to - bit hard to do this on a t61 :)
>
> cheers,
>
> Paul
>    
I now have sound out of the T61 with the 1.9.12 release.  I have to use 
the settings above to get that sound but unimix is now working 
correctly.  I had to remove the /APIC switch in order to boot, otherwise 
it would freeze.
Andy