Mailing List ecs-t6x@2rosenthals.com Archived Message #361

From: "Andy Willis" <ecs-t6x@2rosenthals.com> Full Headers
Undecoded message
Subject: Re: [eCS T60/T61] eCS 2.0 RC6a on T61
Date: Thu, 26 Mar 2009 07:09:32 -0600
To: eCS ThinkPad T60/61 Mailing List <ecs-t6x@2rosenthals.com>

Paul Smedley wrote:
Hi Mark,

------- Original message -------
From: madodel<ecs-t6x@2rosenthals.com>
To: ecs-t6x@2rosenthals.com
Sent: 22.3.'09,  14:20

   
Andy Willis wrote:
     
Overall very good results so far after installing RC6a on a T61.  The
wireless networking connected immediately upon final boot (to a
neighbor's open wireless network, I then setup a profile for my network
and it connected right up too).  Just connected the ethernet and it is
working as well.
  I selected the pcmcia as the T42 option and I just put in a modem card
and it was recognized immediately.
I had to select uniaud as the install didn't pick that up and I don't
hear anything.  I downloaded the latest version from Smedley's site and
still no sound.  I figure I'll uninstall and reinstall and see what I
get.  I thought it might just be that I can't hear it as sometimes that
is a problem but unimix doesn't give me any feedback at all, just
flashes away (no popuplog.os2 entries).  UnimixPM also will not launch
in the same fashion.  The drivers load fine though and look good in
Hardware Manager.  8086 284b -- 82801-ICH8
       
Paul's latest HDA build works fine here on my T61, but I have to run a
script (I think Lewis or Chuck gave to me) to initiate sound.

@unimix.exe -id3 -cnt0 -val1>  nul
@unimix.exe -id3 -cnt1 -val1>  nul
@unimix.exe -id27 -val20>  nul
@unimix.exe -saveH:\mmos2\unimix.ini>  nul
EXIT

But no problem with running Unimix here so not sure if that will help you.
     
Can you please send me a uniinfo log from this machine prior to running unimix, and also one from after? Preferably with the debug build of uniaud 1.9.12?

also wondering if the headphone socket produces sound before you run unimix?

pasha found with latest uniaud on his desktop he needed to switch which socket his speakers were connected to - bit hard to do this on a t61 :)

cheers,

Paul
   
I now have sound out of the T61 with the 1.9.12 release.  I have to use the settings above to get that sound but unimix is now working correctly.  I had to remove the /APIC switch in order to boot, otherwise it would freeze.
Andy

Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster