Chuck McKinnis wrote:

Curtis Fields wrote:

Chuck McKinnis wrote:

Curtis Fields wrote:

Chuck McKinnis wrote:

Works in WinXP. :)

Chuck,

What does XP export to the registry for your gige,  10/100/1000MM, Device 1049h 82566MM.  I still can't get this puppy working.  No problems w/ the wireless but still get the

netstat -r

Interface 0  Ethernet-Csmacd
physical address    000000000000      MTU 1500

Wonder if XP is doing something special to handle it..


Thanks,

I just switched from wifi to wired.  I keep protocol.ini files around to do it.  It is running fine at 100 mbps (all my router supports).

Go to the BIOS

Does the BIOS Setup Utility screen show MAC Address (Internal LAN) as a normal MAC address at the bottom of the page?  If not,

-> Config -> Network -> Ethernet LAN Option ROM -> Enabled

BIOS Setup...  MAC Address (Internal LAN) 00 1C 25 74 79 97, Ethernet LAN Option ROM - Enabled

Set those from your usenet posts..  Still the driver doesn't present the local MAC to the network... Just the 000000000000...  Must be something else I am missing.  When you get a chance, could you see if WinBlows has exported something specific to the registry... Maybe if I copy it into the \IBMCOM\MACS\regAdd.txt.  Have OpenSUSE and eCs on this system...  And my bootable CD  XP-SP2 doesn't have the drivers for the SATA HDD.

Specific model (nnnn-xxx)?  You probably posted it, but I have forgotten.

Does SUSE drive it without any problem?

What shows up in a pci listing (\ecs\install\detectei\pci > pci_list.txt)?

What does \ecs\system\genmac\driver\wrnd32.log show?

What does \ibmcom\lantran.log show?

Listing of \ecs\system\genmac\driver\wrapper_8086_1049?

Chuck,
T61 - 2GB RAM, Dual-2.4GHz, Mobile 965 Express Graphics, PCI BIOS Version 2.10
Ethernet - 1049h 82566MM Gigabit Network Connection, Device 1014h 11a/b/g Wireless LAN Mini PCI Adapter

With SUSE, no problem w/ the wired connection, presents it's built-in MAC, but can't get the wireless working... With eCs 2.0R4 and Genmac 2.2, no problems w/ the wireless, can't get the wired interface working...

Vendor 8086h Intel Corporation
Device 1049h 82566MM Gigabit Network Connection
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 03h, Header Type 00h, Bus Latency 00h
Self test 00h (Self test not supported)
PCI Class Network, type Ethernet
Subsystem ID 20B917AAh Unknown
Subsystem Vendor 17AAh Legend Ltd
Address 0 is a Memory Address (anywhere in 0-4Gb) : FE000000h
Address 1 is a Memory Address (anywhere in 0-4Gb) : FE025000h
Address 2 is an I/O Port : 00001840h
System IRQ 11, INT# A
New Capabilities List Present:
Power Management Capability
  Supports power state D1
  Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
  MSI is disabled
  MSI function can generate 64
bit addresses

Vendor 8086h Intel Corporation
Device 1049h 82566MM Gigabit Network Connection
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 03h, Header Type 00h, Bus Latency 00h
Self test 00h (Self test not supported)
PCI Class Network, type Ethernet
Subsystem ID 20B917AAh Unknown
Subsystem Vendor 17AAh Legend Ltd
Address 0 is a Memory Address (anywhere in 0-4Gb) : FE000000h
Address 1 is a Memory Address (anywhere in 0-4Gb) : FE025000h
Address 2 is an I/O Port : 00001840h
System IRQ 11, INT# A
New Capabilities List Present:
Power Management Capability
  Supports power state D1
  Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
  MSI is disabled
  MSI function can generate 64
bit addresses

'wrnd32.log' will send it directly to your email address...  Lewis' listserve doesn't allow attachements...

lantran.log..  pertinent lines:
WRND32$  WRAPPER for bus: 0 slot: 25 Vendor: 0x8086 Device: 0x1049.
WRND32$  load SYS: "E1E5132.SYS" length: 181760 CRC: 0xcd4e / 0x6ca6.
WRND32$  load INF: "E1E5132.INF" length: 857.
WRND32$  WRAPPER ErrorLog 0x6004002a.
WRND32$  WRAPPER ErrorLog 0xa0040026.
WRND32$  WRAPPER hardware init successfull MAC : 000000:000000.

ls -l \ecs\system\genmac\driver\wrapper_8086_1049
-rwxrwxrwa   1 0        0          21860 Apr  3 08:44 e1e5132.cat*
-rwxrwxrwa   1 0        0           2889 Apr  3 08:44 e1e5132.din*
-rwxrwxrwa   1 0        0           1143 Oct 13  2007 e1e5132.inf*
-rwxrwxrwa   1 0        0         181760 Oct 13  2007 e1e5132.sys*
Updated WinXP drivers from Lenovo...
-rwxrwxrwa   1 0        0         246585 Apr  3 08:43 e1e5132.inf.new*
-rwxrwxrwa   1 0        0         252048 Apr  3 08:43 e1e5132.sys.new*