From: "Gerry Prosser" <ecs-t6x@2rosenthals.com>
DomainKey-Signature: a=rsa-sha1; c=nofws;
        d=googlemail.com; s=gamma;
        h=mime-version:sender:in-reply-to:references:date
         :x-google-sender-auth:message-id:subject:from:to:content-type;
        b=D9gDs30/Kxyz8+90Klv/IaV9SXiXQqUubgtSK+jvLxqbG46hgCEzeg6x5quV9spFYF
         WGktYcwdCgMyVZ/DpnYoDppWQWH8YizFFKPihbA3YGpcAwmhGVb3RitpPiGckOJ4Ffme
         fnadx0WqZD0O7hTtHBRom5W66TrtJPWGBC7Vs=
MIME-Version: 1.0
Sender: gerry.prosser@googlemail.com
In-Reply-To: <list-2847241@2rosenthals.com>
References: <list-2847241@2rosenthals.com>
Date: Sat, 5 Sep 2009 18:27:30 +0100
Message-ID: <d1a227c0909051027v7b4fad1fofe4a482b5d4d7875@mail.gmail.com>
Subject: Re: [eCS T60/T61] Installing rc7 on T61
To: "eCS ThinkPad T60/61 Mailing List" <ecs-t6x@2rosenthals.com>
Content-Type: text/plain; charset=ISO-8859-1

I am still having trouble with the lan connection.

On first boot, before  configuring the wireless, it did sort of half
work - that is to say firefox tried to reload the last pages I looked
at under RC6a and was able to show me some sites (e.g. ubuntu
how-to's) but not others (e.g. gmail).

But since getting the wireless configured and working, I cannot even
ping the router if the wireless is disconnected.

PROTOCOL.INI looks good. TCP addresses are static for lan and dhcp for
wireless.There are no error messages., and lantran.log says both
interfaces are up, as does netstat. And WRND32.LOG shows that both
drivers were loaded.

When I double-click on the widget, the wireless connection is
disabled, but I don't get the 'address conflict resolution' window
that used to show in RC6A

Any ideas ?

Gerry

On Thu, Sep 3, 2009 at 6:09 PM, Lewis G
Rosenthal<ecs-t6x@2rosenthals.com> wrote:
> Hi, Gerry...
>
> ...... Original Message .......
> On Thu, 3 Sep 2009 16:57:18 +0100 "Gerry Prosser" <ecs-t6x@2rosenthals.com>
> wrote:
>>the RC7 install found both my nics (10/100/1000 and 4965 a/g/n) but
>>neither work.
>>
>>WPA Supplicant says :
>>
>>"WPA: Driver used disabled group cipher 0x8 (mask 0x10) - reject
>>Associated with <mac address>
>>WPA: Unsupported CCMP Group Cipher key length 32 (32)
>>RSN: Failed to configure GTK:
>>
>>any idea what that is all about ? WPA/WPA2 was one of the few things
>>in RC6a that worked well for me 8-(
>>
> Sounds like mismatched WPA types. Are you using WPA or WPA2? How is your AP
> configured (i.e., TKIP, AES, or TKIP+AES - the latter gives you the most
> flexibility on the client side)?
>
> As for "neither work," it appears that at least your wireless is "working,"
> but we just can't get the handshake happening. What's with the wired
> connection? Could you post a snippet from LANTRAN.LOG?
> ___
> Lewis G Rosenthal
> Rosenthal a Rosenthal, LLC
> Sent with SnapperMail
>
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> This message is sent to you because you are subscribed to
>  the mailing list <ecs-t6x@2rosenthals.com>.
> To unsubscribe, E-mail to: <ecs-t6x-off@2rosenthals.com>
> To switch to the DIGEST mode, E-mail to <ecs-t6x-digest@2rosenthals.com>
> To switch to the INDEX mode, E-mail to <ecs-t6x-index@2rosenthals.com>
> Send administrative queries to  <ecs-t6x-request@2rosenthals.com>
> To subscribe (new addresses), E-mail to: <ecs-t6x-on@2rosenthals.com> and reply to the confirmation email.
> Web archives are publicly available at: http://lists.2rosenthals.com
>
> This list is hosted by Rosenthal & Rosenthal, LLC
> P.O. Box 281, Deer Park, NY 11729-0281. Non-
> electronic communications related to content
> contained in these messages should be directed
> to the above address. (CAN-SPAM Act of 2003)
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>