| Gönderen: |
"Chuck McKinnis" <ecs-t6x@2rosenthals.com> |
Tam Ba?l?klar
Çözülmemi? ?leti |
| Konu: |
Re: [eCS T60/T61] Installing to TP61 |
| Tarih: |
Wed, 16 Apr 2008 20:24:15 -0600 |
| Alacak: |
eCS ThinkPad T60/61 Mailing List <ecs-t6x@2rosenthals.com> |
|
|---|
Jon Harrison wrote:
I'm having problems with my install, new TP61. The problem is
probably the disk driver, evidenced by "cannot operate harddrive" -
as seen booting w/ rc4, or when booting w/ rc3 I can get to the
maintenance console but LVM does not see the drive.
My drive is a Hitachi Travelstar 7K200 HTS722020K9SA00 200GB 7200
RPM SATA.
DFSee can operate the drive. I would think that rc4 would have a
driver that works. In rc3 I tried default values and the
compatible IDE driver. I didn't specifically see a SATA driver. In rc4 I cannot get to the install menu.
I assume that you can get to the setup menu.
I did send all revelent data to Jan, perhaps it has to do with the
MBR or PBR. I did try various options in dfsee but I decided to
hold off rather than to perhaps make the situation worse. What I
didn't do, and it might be the answer, is rewrite the MBR.
I think you will need to refresh the MBR from DFSee.
New MBR code, KEEP tables
I don't see anywhere in the bios to change the drive controller as
I've seen in older suggestions.
Any ideas would be appreciated.
Jon
--
Chuck McKinnis
http://www.7cities.net/~mckinnis/os2/
505-286-3191
For God sent not his Son into the world to condemn the world; but that the world through him might be saved. John 3:17
|