actually I logged into the Tree from NWTOOLS and then re did my drives and saved the setup in the file...so when I rebooted and the
login came up again this time it gave me the option to log in to either the tree or the server. So now I login via the tree...not really any
different though but I guess I was just only logging into the server and not the tree...
thanks for helping me figure that part out....I kinda think I used to do that a few years back when I could do a lot of management and
after NW5 came in .... the utils became a lot more useless....so just making a connection is about all you can do.
But if the client was updated and consoleone could load then eCS would be a viable desktop again in a netware environment
Vaughn
On Fri, 13 Jun 2003 10:56:54 EST5EDT4,M4.1,M10.5, Lewis G Rosenthal wrote:
>I use a similar startup object to connect, which checks for the presence
>of a NetWare server and if found, brings up NWTools. As I log into
>several different networks, I then select the .nws file I want.
>
>If you open NWTools, though, you can't browse the tree and log in? You
>said you were only making a bindery connection.
>
>Vaughn Bender wrote:
>
>>hi
>>
>>well after going through all this I don't really see any difference from my config to your config I login just fine if my protocols were
>>wrong it would not find the server. .... one thing that I do is in my startup.cmd file I have this line in there to auto bring up the
>>Novell client so I just type my password in and all my drives are automatically mapped and connect to queues if I had any.
>>
>>here is my statement
>>
>>NWTOOLS O:\NETWARE\MAIN.NWS AUTOEXIT
>>
>>"main.nws" is my file that I have that is used to do all the mapping ..etc..
>>
>>Vaughn
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>>Vaughn Bender wrote:
>>>
>>>
>>>
>>>>hi
>>>>
>>>>what I found is if I type cx at the prompt, and then go into nwadmin for eCS..........sure I get the tree, but as I said NWADMIN is
>>>>pretty much useless, it only recognizes about a third of the objects,
>>>>
>>>>No Novell licensing, or Zenworks, or, or , or , or, you can check rights to the objects it recognizes but that is about it.
>>>>
>>>>
>>>>Vaughn
>>>>
>>>> *** Please NOTE: ***
>>>> - Due to the increase in spam,
>>>> to reply to this message you MUST
>>>>remove SPAM! from my email address.
>>>>
>>>>
>>>>
>>>>--
>>>> Certified Netware Engineer
>>>>
>>>> Reseller for Norman Data Antivirus
>>>>--
>>>> Outgoing mail is certified Virus Free.
>>>> Checked by
>>>> Norman Virus Control v5.4 for eCS
>>>> (http://www.norman.com).
>>>>
>>>>
>>>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>>>
>>>>To unsubscribe from this list, send a message to
>>>>steward@2rosenthals.com with the command
>>>>"unsubscribe os2-netware_users" in the body
>>>>(omit the quotes).
>>>>
>>>>For help with other commands, send a message
>>>>to steward@2rosenthals.com with the command
>>>>"help" in the body (omit the quotes).
>>>>
>>>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>--
>>>Lewis
>>>---------------------------------------------------------------------
>>>Lewis G Rosenthal, CNA
>>>Rosenthal & Rosenthal : Accountants / Network Consultants
>>>New York / Northern Virginia : www.2rosenthals.com
>>>Novell Users International : www.whytheylie.com
>>>OS/2's new face is eComStation : www.ecomstation.com
>>>---------------------------------------------------------------------
>>>This OS/2 system (Apollo) uptime is 0 days 00:43 hours and 31 seconds
>>>
>>>
>>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>>
>>>To unsubscribe from this list, send a message to
>>>steward@2rosenthals.com with the command
>>>"unsubscribe os2-netware_users" in the body
>>>(omit the quotes).
>>>
>>>For help with other commands, send a message
>>>to steward@2rosenthals.com with the command
>>>"help" in the body (omit the quotes).
>>>
>>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>>
>>>
>>>
>>>
>>>
>>
>> *** Please NOTE: ***
>> - Due to the increase in spam,
>> to reply to this message you MUST
>> remove SPAM! from my email address.
>>
>>
>>
>>--
>> Certified Netware Engineer
>>
>> Reseller for Norman Data Antivirus
>>--
>> Outgoing mail is certified Virus Free.
>> Checked by
>> Norman Virus Control v5.4 for eCS
>> (http://www.norman.com).
>>
>>
>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>
>>To unsubscribe from this list, send a message to
>>steward@2rosenthals.com with the command
>>"unsubscribe os2-netware_users" in the body
>>(omit the quotes).
>>
>>For help with other commands, send a message
>>to steward@2rosenthals.com with the command
>>"help" in the body (omit the quotes).
>>
>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>
>>
>>
>>
>>
>
>--
>Lewis
>---------------------------------------------------------------------
>Lewis G Rosenthal, CNA
>Rosenthal & Rosenthal : Accountants / Network Consultants
>New York / Northern Virginia : www.2rosenthals.com
>Novell Users International : www.whytheylie.com
>OS/2's new face is eComStation : www.ecomstation.com
>---------------------------------------------------------------------
>This OS/2 system (Apollo) uptime is 0 days 01:18 hours and 20 seconds
>
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-netware_users" in the body
>(omit the quotes).
>
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>
>
*** PLEASE NOTE ***
Because of the incredible increase in SPAM lately
If you wish to send a response to this email
be sure to remove the "SPAM!" from the email address.
--
Certified Netware Engineer
Reseller for Norman Data Antivirus
--
Outgoing mail is certified Virus Free.
Checked by
Norman Virus Control v5.4 for eCS
(http://www.norman.com).
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-netware_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).