os2-netware_users@2rosenthals.com Messaggio archiviato #36

Da: Michael Warmuth <os2-netware_users@2rosenthals.com> Intestazioni complete
Messaggio non codificato
Mittente: os2-netware_users-owner <os2-netware_users-owner@2rosenthals.com>
Oggetto: [OS2NetWare] Re: Two NICs w/IPX bound; second doesn't work
Data: Sun, 21 Nov 2004 11:54:53 +0100
A: os2-netware_users@2rosenthals.com

Lewis G Rosenthal wrote:
However, only LAN0 seems to be binding IPX (i.e., I can't find the LAN from the Wi-Fi interface, LAN1). Is there something else I should be doing to bind both NICs to IPX? I've had systems with two NICs bound to IPX before, but don't remember anything special. There are no board-specific entries in NET.CFG.

There is a restriction in the Netware client for OS/2 (documented in some readme): It can bind to more than one interface, but it does only use the first one for searches. So if only the second interface is connected the netware stack cannot find the server / tree.


Michael Warmuth, Manager IT, michael@warmuth.at
Michael Warmuth - EDV-Dienstleistungen, www.warmuth.at
Waldegghofgasse 27, A-1170 Wien, Austria - EUROPE
Tel: +43-676-3863440, Fax: +43-1-4892728-99

Austria -- The place in the heart of Europe
where no kangaroos are hopping around.


To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-netware_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)


Isriviti: Feed, Riassunto, Indice.
Scrivi a ListMaster