From: |
Lewis G Rosenthal <os2-netware_users@2rosenthals.com> |
Full Headers Undecoded message |
Sender: |
os2-netware_users-owner <os2-netware_users-owner@2rosenthals.com> |
Subject: |
[OS2NetWare] Two NICs w/IPX bound; second doesn't work |
Date: |
Fri, 19 Nov 2004 11:26:32 -0500 |
To: |
OS/2 NetWare Users <os2-netware_users@2rosenthals.com> |
|
---|
I wonder if anyone has some ideas, here...
My previous setup was fairly straightforward: Two CONFIGs, one for wired; one for wireless. In each case, the single bound NIC was LAN0. PROTOCOL.INI entries looked like this:
[odi2ndi_nif]
DriverName = odi2ndi$
Bindings = ciscopcm_nif
NETADDRESS = "I000750CA41BF"
TOKEN-RING = "no"
TOKEN-RING_SNAP = "no"
ETHERNET_802.2 = "yes"
ETHERNET_802.3 = "no"
ETHERNET_II = "no"
ETHERNET_SNAP = "no"
TRACE = 0x0
For the wired CONFIG, all entries were identical except for the driver name, binding, and MAC. Everything worked.
Now, I'm using a single CONFIG, enabling both interfaces. PROTOCOL.INI looks like this:
[odi2ndi_nif]
DriverName = odi2ndi$
Bindings = E100BEO2_nif,ciscopcm_nif
NETADDRESS = "I0003476D5C1A","I000750CA41BF"
TOKEN-RING = "no","no"
TOKEN-RING_SNAP = "no","no"
ETHERNET_802.3 = "no","no"
ETHERNET_802.2 = "yes","yes"
ETHERNET_II = "no","no"
ETHERNET_SNAP = "no","no"
TRACE = 0x0
However, only LAN0 seems to be binding IPX (i.e., I can't find the LAN from the Wi-Fi interface, LAN1). Is there something else I should be doing to bind both NICs to IPX? I've had systems with two NICs bound to IPX before, but don't remember anything special. There are no board-specific entries in NET.CFG.
TIA
--
Lewis
------------------------------------------------------------
Lewis G Rosenthal, CNA Rosenthal & Rosenthal Accountants / Network Consultants New York / Northern Virginia www.2rosenthals.com
eComStation Consultants www.ecomstation.com
Novell Users International www.novell.com/linux/truth
------------------------------------------------------------ =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-netware_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|