I'm seeing an odd trap on my system, after having recreated my print queues on one of my NetWare 6 servers (installed a Smart Array 5i daughterboard in a Compaq ML370 G2, and fully populated the hot swap bays in the box; unfortunately, the Smart Array controller cannot read drives formatted by another ASIC - the onboard Adaptec 160M, in this case - so I had to do a tape restore after building the array).

Loading my settings back up in NetWare Tools skips over my port captures, as the queue IDs have changed (Backup Exec does not necessarily restore the queues themselves; in this case, I had to restore NDS from tape, as well...a mess...but that's another story). No problem; I figured I'd just recature them. However, upon attempting to browse to the first queue I needed, my system trapped hard. Of course, now the actual trap info escapes me <grrr>...

Anybody ever see anything similar? I did clear up a number of oddities I was experiencing when I "converted" my JFS volume back to HPFS (traps during heavy file I/O), but this is another symptom altogether.

TIA