Mailing List os2-netware_users@2rosenthals.com Archived Message #97

From: Lewis G Rosenthal <os2-netware_users@2rosenthals.com> Full Headers
Undecoded message
Sender: os2-netware_users-owner <os2-netware_users-owner@2rosenthals.com>
Subject: OS/2-NetWare Users List: NWIFS trap
Date: Thu, 31 Jul 2003 12:22:28 EST5EDT4,M4.1,M10.5
To: os2-netware_users@2rosenthals.com

Some more details, in the hope that there's someone on this list who can help debug or point me in the right direction...

This problem does not occur on my brother's system (same LAN) with an identical build of the 2.12 requester and identical NET.CFG settings. His kernel build, however, is much older (14.074a; mine is 14.094_uni).

From the trap screen (copied this by hand - I hate doing that - but I've verified the info from a couple subsequent traps):

Exception in module: NWIFS

TRAP 000d    ERRCD=0000  ERACC=****  ERLIM=********
EAX=00000000 EBX=00004d38 ECX=fa0b0000 EDX=00000000
ESI=fa0b0808 EDI=00000000 EBP=00004c50 FLG=00012002

CS:EIP=4d28:00007903 CSACC=009b CSLIM=00009bbf
SS:ESP=0030:00004c42 SSACC=1097 SSLIM=0000411f
DS=4d20 DSACC=0093 DSLIM=00000b2f CR0=8001001b
ES=57f8 ESACC=0093 ESLIM=00000fff CR2=00da3ff8
FS=4d38 FSACC=1093 FSLIM=0000064d
GS=0000 GSACC=**** GSLIM=********

The system detected an internal processing error at
location ## 0168:fff1e3f3 - 000e:c3f3.
60000, 9084

07860686
Internal revision 14.094_uni

Rolling back to the 14.093g_uni kernel, I also get the trap, but with the following diffferences:

EBP=00005394

SS:ESP=0030:00005386 SSLIM=0000479f

ES=57f8 CR2=00653ff8

location ## 0168:fff1e3bb - 000e:c3bb

Again, this trap occurs only when attempting to select a print queue for capturing. In fact, merely opening the dialog without selecting a queue generates the trap.

I'll have to either dig up a copy of the 14.074a kernel for comparison on my machine or copy the kernel files manually form my brother's.

Anyone?

Lewis G Rosenthal wrote:

I'm seeing an odd trap on my system, after having recreated my print queues on one of my NetWare 6 servers (installed a Smart Array 5i daughterboard in a Compaq ML370 G2, and fully populated the hot swap bays in the box; unfortunately, the Smart Array controller cannot read drives formatted by another ASIC - the onboard Adaptec 160M, in this case - so I had to do a tape restore after building the array).

Loading my settings back up in NetWare Tools skips over my port captures, as the queue IDs have changed (Backup Exec does not necessarily restore the queues themselves; in this case, I had to restore NDS from tape, as well...a mess...but that's another story). No problem; I figured I'd just recature them. However, upon attempting to browse to the first queue I needed, my system trapped hard. Of course, now the actual trap info escapes me <grrr>...

Anybody ever see anything similar? I did clear up a number of oddities I was experiencing when I "converted" my JFS volume back to HPFS (traps during heavy file I/O), but this is another symptom altogether.

TIA


--
Lewis
---------------------------------------------------------------------
Lewis G Rosenthal, CNA
Rosenthal & Rosenthal            :  Accountants / Network Consultants
New York / Northern Virginia     :                www.2rosenthals.com
Novell Users International       :                 www.whytheylie.com
OS/2's new face is eComStation   :                www.ecomstation.com
--------------------------------------------------------------------- This OS/2 system (Apollo) uptime is 0 days 00:15 hours and 49 seconds


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-netware_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=




Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster