On Wed, 20 Feb 2008 20:00:21 -0500, Lewis G Rosenthal wrote:
>Different versions handled the debug parameter differently. I haven't
>checked mine recently, but m guess is that NO or NONE are now
>interchangeable.
>
>As for the SSID, when using something to manage your connections (XWLAN),
>this parameter is irrelevant.
>
>What are the timestamps on your w29n51.??? files? Just curious.
>
>Cheers, my friend.
>
>...... Original Message .......
>On Tue, 19 Feb 2008 02:42:13 -0500 (EST) "Hakan"
><os2-wireless_users@2rosenthals.com> wrote:
>>Hi Lewis,
>>
>>Thank you, adding STACK32 did the trick and the system no longer traps.
>> The relevant portion of PROTOCOL.INI now looks like this:
>>
>>[W8086X4224_nif]
>>
>> DriverName = WRND32$
>> VENDOR = 0x8086
>> DEVICE = 0x4224
>> NDIS_SYS = "W29N51.SYS"
>> NDIS_INF = "W29N51.INF"
>> SSID = "WLAN"
>> DEBUGLEVEL = "NO"
>> OPTIONS = "STACK32"
>>
>>I see that you have SSID = "ANY" whereas I have "WLAN" and that you
>>have DEBUGLEVEL = "NONE" whereas mine says "NO". Is there any
>>significance to the former difference? The latter I assume is the very
>>same setting which can be expressed in two different ways.
>>
>>Hakan
>>
>>On Sun, 17 Feb 2008 10:26:49 -0500, Lewis G Rosenthal wrote:
>>
>>>Apologies for the top post, all...just following the flow.
>>>
>>>Sorry, I've been reading this thread off and on from my handheld,
>>>without regard to the threading, and have been missing much of the
>>>discussion. My apologies, Hakan.
>>>
>>>Here's what I have in PROTOCOL.INI:
>>>
>>>[W8086X4224_nif]
>>>
>>> DriverName = WRND32$
>>> VENDOR = 0x8086
>>> DEVICE = 0x4224
>>> NDIS_SYS = "W29N51.SYS"
>>> NDIS_INF = "W29N51.INF"
>>> SSID = "ANY"
>>> DEBUGLEVEL = "NONE"
>>> OPTIONS = "NONE"
>>>
>>>Note that I am no longer using the STACK32 option (on the OPTIONS =
>>>line). I believe (now that I think of it) that the requirement for it
>>>has to do with the version of UNIAUD in use, and the later builds of
>>>UNIAUD seem to play better (pardon the pun) with GenMAC than they did
>>>some time ago (there was a time when we couldn't get sound at all with
>>>GenMAC installed).
>>>
>>>So, to answer your point, and Christian's (and apologies if I've led
>>>everyone astray by talking off the top of my head earlier), STACK32
>>>is/was necessary for the w29n51.sys driver, which did/will trap under
>>>older UNIAUD builds without it. However, using the newest builds of
>>>UNIAUD (1.1.4+), you should be fine, as above.
>>>
>>>Hakan, what was your trap, anyway? 008? (That's what I would expect,
>>>which would indicate an interrupt conflict.)
>>>
>>>On 02/15/08 10:03 am, Hakan thus wrote :
>>>> Hi Lewis,
>>>>
>>>> Where should add this statement? Thanks.
>>>>
>>>> Hakan
>>>>
>>>> On Thu, 14 Feb 2008 22:58:35 -0500, Lewis G Rosenthal wrote:
>>>>
>>>>
>>>>> OPTIONS = STACK32
>>
>>
>>
>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>This message is sent to you because you are subscribed to
>> the mailing list <os2-wireless_users@2rosenthals.com>.
>>To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
>>To switch to the DIGEST mode, E-mail to
><os2-wireless_users-digest@2rosenthals.com>
>>To switch to the INDEX mode, E-mail to
><os2-wireless_users-index@2rosenthals.com>
>>Send administrative queries to
><os2-wireless_users-request@2rosenthals.com>
>>To subscribe (new addresses), E-mail to:
><os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
>>Web archives are publicly available at: http://lists.2rosenthals.com
>>
>>This list is hosted by Rosenthal & Rosenthal, LLC
>>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>>electronic communications related to content
>>contained in these messages should be directed
>>to the above address. (CAN-SPAM Act of 2003)
>>
>>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>
>___
>Lewis G Rosenthal
>Rosenthal & Rosenthal, LLC
>Sent with SnapperMail
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>This message is sent to you because you are subscribed to
> the mailing list <os2-wireless_users@2rosenthals.com>.
>To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
>To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
>To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
>Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
>To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
>Web archives are publicly available at: http://lists.2rosenthals.com
>
>This list is hosted by Rosenthal & Rosenthal, LLC
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
terug naar list