From: "Gilbert D." <os2-wireless_users@2rosenthals.com>
Message-ID: <44FB4E11.3040301@rcn.com>
Date: Sun, 03 Sep 2006 14:50:09 -0700
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; en-US; rv:1.7.12) Gecko/20050922 MultiZilla/1.8.1.1d
MIME-Version: 1.0
To: OS/2 Wireless Users Mailing List <os2-wireless_users@2rosenthals.com>
Subject: Re: [OS2Wireless]Re: DHCP Problems
References: <list-331163@2rosenthals.com>
In-Reply-To: <list-331163@2rosenthals.com>
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Thanks, I had already tried that and most of the file dates are in '04. 
Any other ideas?

tia,

Gilbert

Rick R. wrote:

> Check out the "*.cmd" files under "\MPTN\bin".
> Specially "setup.cmd" and whatever cmd files it calls up in turn.
> Once you find the offending lines, simply rem them out or delete them.
>
>
> */"Gilbert D." <os2-wireless_users@2rosenthals.com>/* wrote:
>
>     On a slightly different issue, I accidentally went into the setup menu
>     and added DHCP server support. The problem is that I have no server
>     software. Now each time I boot up, the following programs attempt to
>     start and leave open cmd files:
>
>     1. cmd.exe \tcpip\java
>     2. ibm DHCP server administrator
>     3. ibm DDNS server administrator
>     4. ibm BINL server administrator
>
>     Is there a simple way to turn these programs off or "de install" them
>     without messing my system up?
>
>     tia,
>
>     G
>
>     Hakan wrote:
>
>     >Thank you Carl.
>     >
>     >On Sun, 03 Sep 2006 10:54:09 -0400 (EDT), Carl Gehr wrote:
>     >
>     >
>     >
>     >>On Sat, 02 Sep 2006 21:21:43 -0400 (EDT), Hakan wrote:
>     >>
>     >>
>     >>
>     >>>Thank you, Stan, I'll try this when I visit this office again in a
>     >>>month or so. I was not familiar with this file. Is there perhaps
>     >>>another file where the default timeout -- 60 seconds -- can be
>     changed?
>     >>>
>     >>>
>     >>>
>     >>Check file:
>     >> \MPTN\BIN\setup.cmd
>     >>There is a command:
>     >> dhcpstrt -i lan0 -d 10
>     >>
>     >>The value after the '-d' is the timeout value. I have my timeout
>     >>set to 10 seconds. I've seen other recommendations for using zero,
>     >>but ten has worked well for me.
>     >>
>     >>One heads-up: If you make ANY changes to the configuration using
>     >>the MPTS command, it will reset the timeout to the 60 second
>     default.
>     >>Therefore, you will always have to go back and 'fix' it to your own
>     >>preference. It is a real PITA that there is not a place in the MPTS
>     >>settings to allow you to specify your own default. Maybe there is a
>     >>way to edit the command itself, but I'm not adventurous enough
>     to try.
>     >>
>     >>Carl
>     >>
>     >>
>     >>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>     >>This message is sent to you because you are subscribed to
>     >> the mailing list .
>     >>To unsubscribe, E-mail to:
>     >>To switch to the DIGEST mode, E-mail to
>     >>To switch to the INDEX mode, E-mail to
>     >>Send administrative queries to
>     >>To subscribe (new addresses), E-mail to: and reply to the
>     confirmation email.
>     >>
>     >>This list is hosted by Rosenthal & Rosenthal
>     >>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>     >>electronic communications related to content
>     >>contained in these messages should be directed
>     >>to the above address. (CAN-SPAM Act of 2003)
>     >>
>     >>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>     >>
>     >>
>     >>
>     >
>     >
>     >
>     >=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>     >This message is sent to you because you are subscribed to
>     > the mailing list .
>     >To unsubscribe, E-mail to:
>     >To switch to the DIGEST mode, E-mail to
>     >To switch to the INDEX mode, E-mail to
>     >Send administrative queries to
>     >To subscribe (new addresses), E-mail to: and reply to the
>     confirmation email.
>     >
>     >This list is hosted by Rosenthal & Rosenthal
>     >P.O. Box 281, Deer Park, NY 11729-0281. Non-
>     >electronic communications related to content
>     >contained in these messages should be directed
>     >to the above address. (CAN-SPAM Act of 2003)
>     >
>     >=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>     >
>     >
>     >
>
>     =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>     This message is sent to you because you are subscribed to
>     the mailing list .
>     To unsubscribe, E-mail to:
>     To switch to the DIGEST mode, E-mail to
>     To switch to the INDEX mode, E-mail to
>     Send administrative queries to
>     To subscribe (new addresses), E-mail to: and reply to the
>     confirmation email.
>
>     This list is hosted by Rosenthal & Rosenthal
>     P.O. Box 281, Deer Park, NY 11729-0281. Non-
>     electronic communications related to content
>     contained in these messages should be directed
>     to the above address. (CAN-SPAM Act of 2003)
>
>     =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>
> ------------------------------------------------------------------------
> Yahoo! Messenger with Voice. Make PC-to-Phone Calls
> <http://us.rd.yahoo.com/mail_us/taglines/postman1/*http://us.rd.yahoo.com/evt=39663/*http://voice.yahoo.com>
> to the US (and 30+ countries) for 2¢/min or less.