Mailing List os2-wireless_users@2rosenthals.com Archived Message #1585

From: "Dave Saville" <os2-wireless_users@2rosenthals.com> Full Headers
Undecoded message
Subject: Asus WL-330g problems
Date: Tue, 10 Oct 2006 17:15:37 +0100 (BST)
To: "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>

I just got my hands on one of these. I have two problems though :-(

1) I have a Taxan monitor with a built in USB hub, two ports on each side of
the screen. I used that to power the Asus and after less than twenty minutes
the port was foobarred - no power coming out. Its twin on the same side had
power, but the Asus would not power up completely - the power led blinks about
every 30 seconds. Using either of the two ports on the other side of the screen
is OK - but I did not leave it in long. There were no other devices plugged
into the hub at the time. I am now rather shy of using the notebook USB port -
I don't want to fry that.

2) It works as an access port and I can connect to it. But I can only get it to
work as a client in open mode. As soon as I set encryption it fails to connect.
Even though the settings are the same as my wireless card.

Firmware is the latest at 1.12.38.37

--
Regards

Dave Saville


Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster