os2-wireless_users@2rosenthals.com Messaggio archiviato #1676

Da:	"Ed Durrant" <os2-wireless_users@2rosenthals.com>	Intestazioni complete Messaggio non codificato
Oggetto:	Re: [OS2Wireless]Getting started with GenMac
Data:	Tue, 31 Oct 2006 07:20:29 +1100
A:	OS/2 Wireless Users Mailing List <os2-wireless_users@2rosenthals.com>

Neil Waldhauer wrote: I've installed GenMac, and it recognises my hardware (thanks, Lewis), but I don't know how to proceed. In the bin directory are some utilities. The instructions for using them are a little too terse for me. scan.exe finds the card. Here is the output. Device-Name : W8086x4220.nif Lan-Number : lan3 Link-Status : 0x4001000c Link-Status-CHG : 1 Media-Connect : CONNECTED LinkSpeed : 0 MBit/s BSSID : 0000000000000000000000000000000000000000000000000000000000000000 Infrastructure : 0x0 (AD-HOC) Encryption : 0x0 (ENABLED) Authentication : 0x0 (OPEN) Privacy Filter : 0x0 (ACCEPT ALL) The entry called Infrastructure is troubling me. Shouldn't that be set to connect to my access point? How do I change that? Neil There ARE command line utilities, however by far the simplest solution is to download and install WLANMON (I recommend v 2.12) to let it change these settings for you and start the wireless radio. Several of us have had issues with v 1.7 of the Genmac driver and have gone back to v 1.6. I wrote a complete step by step install instruction list on this and the Genmac mailing list for this Intel 2200BG card a little while ago - I send it directly to your e-mail address rather than "clog up" the list here. Cheers/2 Ed.

Isriviti: Feed, Riassunto, Indice.
Disiscriviti
Scrivi a ListMaster