Poštni seznam arhiviranih sporo?il Prejšnje sporo?ilo naslednje sporo?ilo Nazaj na seznam

Od: "Ed Durrant" <os2-wireless_users@2rosenthals.com> Glava
Izvorno E-sporo?ilo
Zadeva: Re: [OS2Wireless]Getting started with GenMac
Datum: Tue, 31 Oct 2006 07:20:29 +1100
Za: OS/2 Wireless Users Mailing List <os2-wireless_users@2rosenthals.com>

Neil Waldhauer wrote:
I've installed GenMac, and it recognises my hardware (thanks, Lewis), but I
don't know how to proceed.

In the bin directory are some utilities. The instructions for using them are a
little too terse for me.

scan.exe finds the card. Here is the output.

Device-Name     : W8086x4220.nif
Lan-Number      : lan3
Link-Status     : 0x4001000c
Link-Status-CHG : 1
Media-Connect   : CONNECTED
LinkSpeed       : 0 MBit/s
BSSID           :
0000000000000000000000000000000000000000000000000000000000000000
Infrastructure  : 0x0  (AD-HOC)
Encryption      : 0x0  (ENABLED)
Authentication  : 0x0  (OPEN)
Privacy Filter  : 0x0  (ACCEPT ALL)

The entry called Infrastructure is troubling me. Shouldn't that be set to
connect to my access point? How do I change that?

Neil
There ARE command line utilities, however by far the simplest solution is to download and install WLANMON (I recommend v 2.12) to let it change these settings for you and start the wireless radio.

Several of us have had issues with v 1.7 of the Genmac driver and have gone back to v 1.6.

I wrote a complete step by step install instruction list on this and the Genmac mailing list for this Intel 2200BG card a little while ago - I send it directly to your e-mail address rather than "clog up" the list here.

Cheers/2

Ed.
Naro?iti: Poro?ilo (Feed), Izvle?ek (Digest), Indeks.
Odjava
E-pošta za mojstra za sezname