| From: |
"Lothar Frommhold" <os2-wireless_users@2rosenthals.com> |
Full Headers
Undecoded message |
| Subject: |
Re: [OS2Wireless]Re: Getting started with GenMac |
| Date: |
Mon, 30 Oct 2006 15:50:07 -0600 |
| To: |
OS/2 Wireless Users Mailing List <os2-wireless_users@2rosenthals.com> |
|
|---|
Ed:
If this is not too imposing, could you perhaps also send a copy of the installation of the Intel 2200BG card to me? I would much appreciate it!
Lothar
Ed Durrant wrote:
Neil Waldhauer wrote:
I've installed GenMac, and it recognises my hardware (thanks, Lewis), but I
don't know how to proceed.
In the bin directory are some utilities. The instructions for using them are a
little too terse for me.
scan.exe finds the card. Here is the output.
Device-Name : W8086x4220.nif
Lan-Number : lan3
Link-Status : 0x4001000c
Link-Status-CHG : 1
Media-Connect : CONNECTED
LinkSpeed : 0 MBit/s
BSSID :
0000000000000000000000000000000000000000000000000000000000000000
Infrastructure : 0x0 (AD-HOC)
Encryption : 0x0 (ENABLED)
Authentication : 0x0 (OPEN)
Privacy Filter : 0x0 (ACCEPT ALL)
The entry called Infrastructure is troubling me. Shouldn't that be set to
connect to my access point? How do I change that?
Neil
There ARE command line utilities, however by far the simplest solution is to download and install WLANMON (I recommend v 2.12) to let it change these settings for you and start the wireless radio.
Several of us have had issues with v 1.7 of the Genmac driver and have gone back to v 1.6.
I wrote a complete step by step install instruction list on this and the Genmac mailing list for this Intel 2200BG card a little while ago - I send it directly to your e-mail address rather than "clog up" the list here.
Cheers/2
Ed.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|