Message-Id: <200512161626.jBGGQRV7013461@ms-smtp-03-eri0.socal.rr.com>
In-Reply-To: <5429.11.05.37.16.12.2005@shana.wa4zlw.homedns.org>
References: <5427.10.48.34.16.12.2005@shana.wa4zlw.homedns.org> <114693.11.03.15.16.12.2005@shana.wa4zlw.homedns.org> 
	<5429.11.05.37.16.12.2005@shana.wa4zlw.homedns.org>
MIME-Version: 1.0
Date:  Fri, 16 Dec 2005 08:26:27 -0800
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Doug LaRue" <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] new xwlan & t23

** Reply to message from "Leon D. Zetekoff, NCE" <wa4zlw@backwoodswireless.net> on Fri, 16 Dec 2005 11:20:13 -0500


> Sam Lewis wrote:
> 
> > Leon D. Zetekoff, NCE wrote:
> >
> >> Hi folks.
> >>
> >> Tried the new xwlan (both the widget and standalone) and I still 
> >> can't seem to connect with my APs. Works under Windoze on the same 
> >> box. This is with the IBM mPCI card in the t23. Any ideas?
> >
> > I would get it to work by itself first before adding the complexity of 
> > XWLan into the mix.  Are you using the IBM Prism driver?
> 
> hi sam....yes I had it working. and yes I am using the IBM drivers. Also 
> for some strange reason sound is not working now either. Not getting 
> loaded at boot time.
> 
> Ideas?
> 
> leon

Probably an IRQ problem. One of the guys in the local users group is having problems getting GenMAC to work
and his sound went away when the driver was loaded also. Came back after removing the driver.


Doug LaRue

"The idea that Bill Gates has appeared like a knight in shining armor to
 lead all customers out of a mire of technological chaos neatly ignores
 the fact that it was he, who by peddling second-rate technology, led them
 into it in the first place."
- Douglas Adams, author of "The Hitchhiker's Guide to the Galaxy".
-                full text: http://www.mg.co.za/mg/news/adams.html

"Excuse me: Can you tell me the IP address of this cable?"
 - Actual question from a MCSE!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=