In-Reply-To: <200511302209.jAUM9j4G065723@smtp-vbr8.xs4all.nl>
References: <200511302209.jAUM9j4G065723@smtp-vbr8.xs4all.nl>
MIME-Version: 1.0
Message-ID: <15055-82844@sneakemail.com>
Date:  Wed, 30 Nov 2005 15:20:52 -0800
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Bob" <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] anyone have GenMac and NETBIOS/TCPIP working?

** Reply to message from "Frank Vos frankvos@xs4all.nl" on Wed, 30 Nov 2005
23:09:40 +0100 (CET)

Here is LANTRAN.LOG.  The first part is the boot process and then the last part
is after issuing the "net use" command, which gives the message "The REQUESTER
service could not be started".  I do not see any errors although I don't know
why there is reference to token-ring.



LT00073: FFST/2 is installed but is not started.  LANTRAN.LOG is being created.
IBM OS/2 LANMSGDD [05/21/04] 6.00 is loaded and operational.
IBM OS/2 NETBEUI 6.00.0
NETBEUI: Using a 32-bit data segment.
Installing NETWKSTA.200 Version 6.0. IBM LAN Redirector ( May 25, 2005)

IBM OS/2 NETBIOS 4.0
Adapter 0 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS
applications.
Adapter 1 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS
applications.
Adapter 2 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS
applications.
NETBIOS 4.0 is loaded and operational.
GENPRISM_NIF: APM registered.
GENPRISM_NIF is loaded and operational.
IBM LANVDD is loaded and operational.
IBM OS/2 LAN Netbind
WRND32$  WRAPPER for bus: 2 slot: 2 Vendor: 0x8086 Device: 0x1043.
WRND32$  load SYS: "W70N51.SYS" length: 2479104 CRC: 0x6bb2 / 0x6bb2.
WRND32$  load INF: "W70N51.INF" length: 2041.
WRND32$  WRAPPER hardware init successfull MAC : 000CF1:28897E.
WRND32$  bound to  "VECTOR".
GENPRISM_NIF: OpenAdapter called.

issued "net use"

Adapter 0 is using node address 000D608B5786.  The Token-Ring format is
00B006D1EA61.
GENPRISM_NIF: SetLookAhead called. Param1=256
GENPRISM_NIF: AddMulticastAddress called. Param2= 3 0 0 0 0 1
GENPRISM_NIF: AddMulticastAddress rc=0
GENPRISM_NIF: SetPacketFilter called. Param1=3
GENPRISM_NIF: SetPacketFilter rc=0
Adapter 1 is using node address FFFFFFFFFFFF.  The Token-Ring format is
FFFFFFFFFFFF.
Adapter 2 is using node address 000CF128897E.  The Token-Ring format is
00308F14917E.

-- 
Robert Blair
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=