Hello Jim,
On Tue, 29 Nov 2005 17:18:05 -0800, Jim Showalter wrote:
>
>
>Bob wrote:
>> ** Reply to message from "Jim Showalter jshowalt@mindspring.com" on Tue, 29 Nov
>> 2005 15:33:50 -0800
>>
>>
>>>I have the same problem on a new 1.2 system I just built, so I tried
>>>protofix.cmd on it. Nothing changed. Reading the script, it only makes
>>>changes to protocol.ini and never even looks at ibmlan.ini, where the
>>>problem is.
>>
>>
>> So what is the problem with IBMLAN.INI? I would like to get this resolved.
>>
>At the moment, my ibmlan.ini has blanks after wrknets = and srvnets =,
>because in MPTS I deleted all adapters. In the [networks] section,
>there are no entries.
>
>I have had similar problem to yours, in that I had set up a wired
>adapter on lan0 with tcp/ip and netbios over tcp/ip, and a wireless
>adapter on lan1 with tcp/ip and netbios over tcp/ip, and could not get
>peer to work on either. I have been experimenting with various
>combinations with no success so far.
>
>I am beginning to believe that it is not possible to have netbios over
>tcp/ip on more than one adapter.
It's possible, I have that working right now. TCP/IP, TCPBEUI and NETBIOS
on the wired NIC. TCP/IP and TCPBEUI on the WLAN NIC.
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)