DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=dk20050327; d=mindspring.com;
  b=QWbgWl5ZqPtDoGey1maYkjZu1qo3pSLWOL1KKe6Ls+Z7wXUBtOJ4RkfAcBBBXFSe;
  h=Received:Message-ID:Date:From:User-Agent:X-Accept-Language:MIME-Version:To:Subject:References:In-Reply-To:Content-Type:Content-Transfer-Encoding:X-ELNK-Trace:X-Originating-IP;
Message-ID: <438CFDCD.1070505@mindspring.com>
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; en-US; rv:1.7.11) Gecko/20050728
MIME-Version: 1.0
References: <200511291950.jATJoh8w013574@smtp-vbr15.xs4all.nl> <438CE55E.3090403@mindspring.com> <20230-31281@sneakemail.com>
In-Reply-To: <20230-31281@sneakemail.com>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Tue, 29 Nov 2005 17:18:05 -0800
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Jim Showalter <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] anyone have GenMac and NETBIOS/TCPIP working?



Bob wrote:
> ** Reply to message from "Jim Showalter jshowalt@mindspring.com" on Tue, 29 Nov
> 2005 15:33:50 -0800
> 
> 
>>I have the same problem on a new 1.2 system I just built, so I tried
>>protofix.cmd on it.  Nothing changed.  Reading the script, it only makes
>>changes to protocol.ini and never even looks at ibmlan.ini, where the
>>problem is.
> 
> 
> So what is the problem with IBMLAN.INI?  I would like to get this resolved.
> 
At the moment, my ibmlan.ini has blanks after wrknets = and srvnets =, 
because in MPTS I deleted all adapters.  In the [networks] section, 
there are no entries.

I have had  similar problem to yours, in that I had set up a wired 
adapter on lan0 with tcp/ip and netbios over tcp/ip, and a wireless 
adapter on lan1 with tcp/ip and netbios over tcp/ip, and could not get 
peer to work on either.  I have been experimenting with various 
combinations with no success so far.

I am beginning to believe that it is not possible to have netbios over 
tcp/ip on more than one adapter.  I was going to try that when I ran 
into the problem at boot.

I'll try Frank's recommended protochk.cmd next, although reading the cmd 
file doesn't look encouraging.  Lastly, I'll remove protocol.ini and 
ibmlan.ini and start over.  Or worse, reinstall the os, as the one I am 
experimenting with was only installed the day before yesterday and I'm 
not using it for anything other than this experiment, so far.

-- 
Jim Showalter
"...the Greater Good and the Greater Profit
are not compatible aims..."
Yann Martel, "Life of Pi"
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=