Message-Id: <200511300005.jAU05tGq080950@smtp-vbr11.xs4all.nl>
In-Reply-To: <25749-05869@sneakemail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Date:  Wed, 30 Nov 2005 01:05:48 +0100 (CET)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Frank Vos" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] anyone have GenMac and NETBIOS/TCPIP working?

On Tue, 29 Nov 2005 15:53:51 -0800, Bob wrote:

>** Reply to message from "Frank Vos frankvos@xs4all.nl" on Tue, 29 Nov 2005
>20:50:37 +0100 (CET)
>
>
>> To prevent this from happening after this kind of changes is to run PROTOFIX.CMD, 
>> this program included in eCS (CD1) checks both files and changes IBMLAN.INI if something
>> is wrong.
>
>results from PROTOFIX
>
>[PROTOFIX.CMD] Checking if c:\ibmcom\protocol.ini requires update
>[PROTOFIX.CMD] c:\ibmcom\protocol.ini was not changed
>
>Protocol.ini has the following
>
>[NETBIOS]
>
>   DriverName = netbios$
>   ADAPTER0 = tcpbeui$,0
>   ADAPTER1 = tcpbeui$,1
>   ADAPTER2 = tcpbeui$,2
>
>IBMLAN.INI had
>
>[networks]
>
>; This information is read by the redirector at device initialization time.
>net1  =  NETBEUI$,1,LM10,34,100,14
>net2  =  NETBEUI$,2,LM10,34,100,14
>
>which I changed to
>
>[networks]
>
>; This information is read by the redirector at device initialization time.
>net0  =  NETBEUI$,0,LM10,34,100,14
>net1  =  NETBEUI$,1,LM10,34,100,14
>net2  =  NETBEUI$,2,LM10,34,100,14
>
>because I have three network interfaces defined, but still get the same results
>(message SYS1719).  Should NETBEUI$ be something like TCPBEUI$ ?

Sorry Bob and Jim. The correct file is called PROTOCHK.CMD and I found it on the second CD
of eCS 1.1, not on eCS 1.2. In case you don't have eCS 1.1 you can find it here:
http://www.sjoerd-visser.demon.nl/net-os2/extra/protocheck.cmd

You are right, if you only have TCPBEUI the lines should be 
net0  =  TCPBEUI$,0,LM10,34,100,14
net1  =  TCPBEUI$,1,LM10,34,100,14
net2  =  TCPBEUI$,2,LM10,34,100,14
But it's better to use the program to change it for you.

Kind regards,
Frank


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=