>** Reply to message from "Frank Vos frankvos@xs4all.nl" on Tue, 29 Nov 2005
>20:50:37 +0100 (CET)
>
>
>> To prevent this from happening after this kind of changes is to run PROTOFIX.CMD,
>> this program included in eCS (CD1) checks both files and changes IBMLAN.INI if something
>> is wrong.
>
>results from PROTOFIX
>
>[PROTOFIX.CMD] Checking if c:\ibmcom\protocol.ini requires update
>[PROTOFIX.CMD] c:\ibmcom\protocol.ini was not changed
>
>Protocol.ini has the following
>
>[NETBIOS]
>
> DriverName = netbios$
> ADAPTER0 = tcpbeui$,0
> ADAPTER1 = tcpbeui$,1
> ADAPTER2 = tcpbeui$,2
>
>IBMLAN.INI had
>
>[networks]
>
>; This information is read by the redirector at device initialization time.
>net1 = NETBEUI$,1,LM10,34,100,14
>net2 = NETBEUI$,2,LM10,34,100,14
>
>which I changed to
>
>[networks]
>
>; This information is read by the redirector at device initialization time.
>net0 = NETBEUI$,0,LM10,34,100,14
>net1 = NETBEUI$,1,LM10,34,100,14
>net2 = NETBEUI$,2,LM10,34,100,14
>
>because I have three network interfaces defined, but still get the same results
>(message SYS1719). Should NETBEUI$ be something like TCPBEUI$ ?
You are right, if you only have TCPBEUI the lines should be
net0 = TCPBEUI$,0,LM10,34,100,14
net1 = TCPBEUI$,1,LM10,34,100,14
net2 = TCPBEUI$,2,LM10,34,100,14
But it's better to use the program to change it for you.
Kind regards,
Frank
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
volver a la lista