[OS2Wireless] anyone have GenMac and NETBIOS/TCPIP working?
Datum:
Sun, 27 Nov 2005 13:05:40 -0800
Za:
os2-wireless_users@2rosenthals.com
** Reply to message from "Chris Clayton clayton-at-ieee.org
|os2-wireless_users|" <...> on Sat, 26 Nov 2005
10:03:08 -0700 (MST)
> The same error message "NET2186: The service is not responding to the
> control function." that Mark got.
I am not getting any error messages.
The REQUESTER service is not started.
The REQUESTER service is starting..........
The REQUESTER service was started successfully.
> If you issue a NET USE or LOGIN
> command and PEER is not running, then it will try to start. If it
> successfully starts, you may be asked to log in. Try issuing at NET
> VIEW command to see who else is up. Then issue NET VIEW \\servername
SYS0053: The network path was not found
> to see what 'servername' has shared. If either or both commands fails
> then you may have a problem with PEER. In this case, if you know that
> there are shares available on 'servername', you could get to them
> before, and you are running NETBIOS over TCP/IP then try: 1) Stop PEER
> - NET STOP REQ /Y 2) Delete d:\IBMCOM\RFCCACHE.LST 3) Restart PEER -
> LOGON username /p:password This clears out the broadcast cache which
> sometimes has old info in it that in turn causes problems when trying
> to connect to shared resources.
After any of the LAN connections has an IP using DHCP I issue a "net use"
command (I am using XWLAN 2.02 for the wireless connections).
Using the wired LAN no problems and I get a list of the connections started.
Using the Linksys PC card wireless (PRISM drivers) I get the following message
"There are no entries in the list"
but if I go to "sharing and connections" it shows that the connections were
made so I have a shared file and a remote printer (Why is it connecting if
there are no entries in the list?).
Using the internal wireless (GenMac drivers) I get the same message
"There are no entries in the list"
followed about 20 seconds later with a pop-up with the message (Why is it
trying to connect if there are no entries in the list?).
"One or more of your connection failed"
when I go to "sharing and connections" it shows that the connections are
inactive. Clicking the re-connect button I get the message "SYS0053: The
network path was not found".
--
Robert Blair
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
Nazaj na seznam