Message-Id: <200511261703.jAQH38OI048873@taka.swcp.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Date:  Sat, 26 Nov 2005 10:03:08 -0700 (MST)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Chris Clayton" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] anyone have GenMac and NETBIOS/TCPIP working?

On Fri, 25 Nov 2005 10:35:59 -0800, Bob wrote:

>** Reply to message from "Chris Clayton clayton@ieee.org" on Fri, 25 Nov 2005
>10:01:34 -0700 (MST)
>
>> On one of my TP T41s, I initially had a problem with NetBIOS not
>> starting after installing Genmac & xwlan 2.0.
>
>What indication did you have that NETBIOS did not start.  Currently (using the
>internal wireless nic) I can not connect to my shared drives and printer (using
>genmac and xwlan 2.02).  Using the PRISM driver and xwlan 2.02 with a PC card
>wireless I can connect to the shared drives and printer although the message
>from "net use" would seem to indicate that it did not connect.

The same error message "NET2186: The service is not responding to the
control function." that Mark got.  If you issue a NET USE or LOGIN
command and PEER is not running, then it will try to start.  If it
successfully starts, you may be asked to log in.  Try issuing at NET
VIEW command to see who else is up.  Then issue NET VIEW \\servername
to see what 'servername' has shared.  If either or both commands fails
then you may have a problem with PEER.  In this case, if you know that
there are shares available on 'servername', you could get to them
before, and you are running NETBIOS over TCP/IP then try:  1) Stop PEER
- NET STOP REQ /Y  2) Delete d:\IBMCOM\RFCCACHE.LST 3) Restart PEER - 
LOGON username /p:password  This clears out the broadcast cache which
sometimes has old info in it that in turn causes problems when trying
to connect to shared resources.

Cheers,

Chris



>
>-- 
>Robert Blair
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-wireless_users" in the body
>(omit the quotes).
>
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>
>This list is hosted by Rosenthal & Rosenthal
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>






=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=