Poštni seznam arhiviranih sporo?il Prejšnje sporo?ilo naslednje sporo?ilo Nazaj na seznam

Od: Christian Langanke <os2-wireless_users@2rosenthals.com> Glava
Izvorno E-sporo?ilo
Pošiljalec: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Zadeva: [OS2Wireless] Wlan, wired and wireless connections
Datum: Wed, 16 Nov 2005 22:38:18 +0100
Za: os2-wireless_users@2rosenthals.com

Chris Clayton wrote:

Until the 'IP disabled' problem is resolved, the best approach is to
remark out all ifconfig statements but the localhost configuration from
d:\mptn\bin\setup.cmd.  The manually run scripts to setup/.change
between the wired and wireless nics.  The following are the scripts I
use:
 

Hmm, you could put the appropriate commands into the XWLAN script and set the TCP/IP configuration setting in XWLAN for all profiles to "none" (as it does not work for now anyway)..

Then the commands are executed automatically when wifi is connected or disconnected. In every case I see no reason to clear setup.cmd, instead only all config for the wifi interface should be left out of it (anyway) and then setup.cmd could be called on Wifi disconnect event to reset to the "cabled configuration". The config commands would be included into the XWLAN script within the connect event.

So you would switch between cabled and wireless just by changing between a dummy profile "cabled" which would connect to a nonexistant access point and fail with it, forcing the disconnect event (try any nonsense as SSID so that XWLAN will never connect) and a profile matching your access point, focing the connect event. IMHO this is a much more straight forward concept to change between cabled and wifi interface - much more simple and easier to use - instead of chasing icons.

bye, Christian

-------------------------------------------------

Christian Langanke
COS2E & CWSE
Team OS/2 Ruhr e.V.
cla@clanganke.de
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Naro?iti: Poro?ilo (Feed), Izvle?ek (Digest), Indeks.
Odjava
E-pošta za mojstra za sezname