Had dsl installed today with a Linksys router BEFW11S4 version 4 between. Modem uses PPoE dynamic address. Can ping and change
settings in router. Appears tcpip settings are ok with possible exception of Route Add Net statement in setup.cmd:
route -fh
arp -f
ifconfig lo 127.0.0.1
ifconfig lan0 192.168.1.5 netmask 255.255.255.0 metric 1 mtu 1492
REM ifconfig lan1
REM ifconfig lan2
REM ifconfig lan3
REM ifconfig lan4
REM ifconfig lan5
REM ifconfig lan6
REM ifconfig lan7
REM ifconfig sl0
route add net 142.161.130.155 192.168.1.1 1 netmask 255.255.255.0 > null
ipgate off
this is tcpip ver 4.0
142.161.130.155 dns isp server, tried gateway with router address no better
ipgate either way no difference, only 1 box connected to router.
[E:\]netstat -r
destination router netmask refcnt use flags snmp intrf
metric
127.0.0.1 127.0.0.1 255.255.255.255 2 618 UH 0 lo
161.2.155.0 192.168.1.1 255.255.255.0 0 0 UG 0 lan0
192.168.1.0 192.168.1.5 255.255.255.0 0 0 U 0 lan0
Router is set as: PPoE, user, password, keepalive, mtu 1491
Routing Table Entry List
Destination LAN IP Subnet Mask Default Gateway Hop Count Interface
0.0.0.0 0.0.0.0 205.200.254.6 1 WAN
216.130.91.19 255.255.255.255 0.0.0.0 1 WAN
192.168.1.0 255.255.255.0 0.0.0.0 1 LAN
205.200.254.6 is a gateway box of isp beyond modem
216.130.91.19 is dynamic address given by modem
Appears there should more entries replacing the zeroes in probably gateway, if so in tcpcfg or router? Wireless is turned off in router
Static ip from box to router.
retour à la liste