DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=dk20050327; d=mindspring.com;
  b=iWscdoAN2/CuGsJnxnqpYjcjFaF4WvMD+1tGmt6cGBI+rxn3XXm6efCNYiz/OgLA;
  h=Received:Message-ID:Date:From:User-Agent:X-Accept-Language:MIME-Version:To:Subject:Content-Type:Content-Transfer-Encoding:X-ELNK-Trace:X-Originating-IP;
Message-ID: <4377C9B7.2080605@mindspring.com>
User-Agent: Mozilla/5.0 (OS/2; U; Warp 4.5; en-US; rv:1.7.11) Gecko/20050728
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Sun, 13 Nov 2005 15:18:15 -0800
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Jim Showalter <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] Wlan, wired and wireless connections

I have both a wired nic and wireless nic in my notebook. For the longest 
time I had used only the wired nic as I couldn't determine a driver for 
the wireless nic.  Now that I have a driver for the wireless nic 
(IBMPRISM) and can get it connected, I'd like  to use Wlan/xWlan to 
select which nic I use after booting up.

I installed Wlan 2.0, but have the IP Disabled problem, so I then 
installed the 1.20 version.  Now I need to know what needs to be set 
where so that I don't get error messages during boot if my wired nic is 
uncabled and how to activate the wireless nic and be able to switch 
between them.

When tcpcfg2 has "not enabled" and "DHCP" set for the wired lan and the 
nic is uncabled, the command run during boot for dhcpstrt fails.

Both nics have tcpip and netbios over tcpip in MPTS, as I have a peer 
network.

What I really want to do is have a clean boot with no network active, 
then select which I will use for that session, either wired, wireless at 
home, or a hotspot.

Thanks.

-- 
Jim Showalter

I am a Veteran, and I voted for one.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=