Message-Id: <20051113082211-41070-7@2rosenthals.com>
In-Reply-To: <7234a03c0511092311m1c9ff2c4w42f6319d9bfabe5f@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Date:  Sun, 13 Nov 2005 13:23:38 +0100 (CET)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Jan van Wijk" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] No success with new GENMAC and Intel 2200

FYI,

On Thu, 10 Nov 2005 08:11:41 +0100, Jeroen Besse wrote:

>> One culprit could be the kernel, I am using 14.104a, while 14.103a
>> seems to be the current eCS 1.2 one ...
>>
>> Note that I DID have a more or less working GENMAC 0.90 beta
>> a few months ago, but that was with an older kernel ...
>
>I upgraded my kernel from 14.100c to 14.104a, and (so far) it runs
>fine. So if it's a kernel issue, it's only a kernel issue for the 2200
>card you have.

OK, I did some more tests, trying to find a combinations that might work.

I installed the eCS 2.0 alpha, and tried GENMAC 1.00 on that,
same problem, TRAP 0008

Then I installed eCS 1.2 media refresh, with the IBMNUL driver
and just TCP/IP (no LAN or PEER).

After installing GENMAC 1.00 and replacing IBMNUL by
the Genmac driver for my 2200 => TRAP 0008

I did several experiments with this installation, disabling and enabling 
stuff in the BIOS, REMing many drivers in config.sys and running 
docked or stand-alone.

The outcome is a TRAP 0008 in 90% of the cases, and a HANG
in NETBIND in two cases ...

I will take my T42 with to Warpstock Europe, hope we can
do some constructive debugging there :-)

Regards, JvW


PS:
I have seen one other report about a TRAP 0008 with the Intel 2200 


=========================================================================
DFSee Home: http://www.dfsee.com; Jan van Wijk;  Author of DFSee - info@dfsee.com

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=