Message-Id: <20051109162747-27101-7@2rosenthals.com>
In-Reply-To: <200511092010.jA9KAg1x017763@smtp-vbr12.xs4all.nl>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Date:  Wed, 09 Nov 2005 21:29:23 +0100 (CET)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Jan van Wijk" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] No success with new GENMAC and Intel 2200

On Wed, 09 Nov 2005 21:10:36 +0100 (CET), Frank Vos wrote:

>>The utility kept reporting "IP Interface is disabled".
>>Trying to reconfigure from the XWLAN menu fails.
>>
>>However, using the card is no problem, it does have a IP address 
>>(through DHCP), and FireFox works over the card with no problems.
>>
>>I have seen by now that has been reported by several people
>>with varying results of card operation, but consisten failure
>>of the Wireless LAN monitor display ...
>
>Same here with an Arthem PCMCIA card. The connection is working,
>but I also get the message "IP Interface is disabled". I can't 
>open the properties of XWLAN to see what's wrong.

Yes, I have seen sevaral reports on the net now ...


Anyway, I went one step further with the Intel 2200 test, removed
the NETBEUI and TCPBEUI as well as the IBMLAN stuff to
have a pure and simple TCP/IP environment.

I still get the IPE just after NETBIND starts ...
Also, LANTRAN.LOG is empty at that point.

One culprit could be the kernel, I am using 14.104a, while 14.103a
seems to be the current eCS 1.2 one ...

Note that I DID have a more or less working GENMAC 0.90 beta
a few months ago, but that was with an older kernel ...

Regards, JvW

=========================================================================
DFSee Home: http://www.dfsee.com; Jan van Wijk;  Author of DFSee - info@dfsee.com

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=