DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
        s=beta; d=gmail.com;
        h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references;
        b=t/NK7CIjw3NUl6YIaCmRpluS8LSjIGP9unHLT55nT4awIPX/6YRy2Y0ImVPAkneF/2pAoy/H0QliaZVhCWVRcA3rPn+GUmYREQz/7J+Qj5s2UDBV7WbnG1AyekzQ0bjtUnlUfy09nY8inSN2XhrTwrxckRmpaOSthsI7tEzXDc8=
Message-ID: <7234a03c0511071303v626833a6gb0363f08ed64134f@mail.gmail.com>
In-Reply-To: <7234a03c0511071144q65567fe8n459206d2150a6dd1@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
References: <200511071448.jA7Em6lt002275@sputnik.hautspot.com>
	 <7234a03c0511070735s3f7ffb08y252692993cd18ab@mail.gmail.com>
	 <436F793C.1070604@ptdprolog.net>
	 <7234a03c0511070826x1fb21a79l2de115b7adfc2516@mail.gmail.com>
	 <436FAAA3.2030306@clanganke.de>
	 <7234a03c0511071144q65567fe8n459206d2150a6dd1@mail.gmail.com>
Date:  Mon, 7 Nov 2005 22:03:20 +0100
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Jeroen Besse <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] XWLAN Binding Problem (Was: Problem with new XWLan 2.0 (Oh and BTW, GenMac 1.0 is out))

On 11/7/05, Jeroen Besse <jabesse@gmail.com> wrote:
> On 11/7/05, Christian Langanke <cla@clanganke.de> wrote:
> > Jeroen, Mark,
> >
> > thank you for your postings. For this problem I'll write to this list
> > instead of the gmane lsit unless the problem is solved.
> >
> > Jeroen Besse wrote:
> >
> > >>I tried replying to your post on the wlan forum but neither Pronews o=
r web
> > >>interface seem to work for me.  Is there a TCP/IP page in your xWlan =
properties
> > >>notebook?  There is none here.
> > >>
> > >>
> > Sure. V2.00 does not have it any more. It is not longer necessary (as
> > long as everything works well).
> >
> > >
> > >In 1.2 there was a page on which you could bind the wlan application
> > >to a netx interface.
> > >
> > So far, so wrong. The property to specify the IP interface on that
> > properties page did not bind any IP interface to your card. Instead onl=
y
> > MPTS does so, and no other piece of software. XWLAN V1.2, unlike the ne=
w
> > version, was not able to determine the IP interface bound to your WLAN
> > device, so you had to specify it - according to the MPTS binding.
> >
> > >This is removed in 2.0. However, I think that the
> > >problem is somewhere there...
> > >
> > Yes, obviously. I am very confident that XWLAN V2.00 well determines th=
e
> > correct IP interface correctly. The fact that TCP/IP is disabled, does
> > not mean that XWLAN uses the wrong one. It just states that it cannot b=
e
> > configured (due to whatwever reason).
> >
> > >I'll try to remove my net1 (wired
> > >ethernet) from mpts, to see whether that fixes it. I already tried to
> > >swith places between the wired and wireless interface, but that didn't
> > >resolve it. I hope to come back on this tonight (CET).
> > >
> > >
> > Unfortunately I cannot reproduce the error. When I go back to V1.2 and
> > forth again to V2.00, everything works fine.
> >
> > To compare the properties between V1.2 and V2.0, launch an ini editor
> > and check:
> >
> > V1.2
> > Application: "Wireless LAN Monitor:Properties"
> > Keys: "IPInterface_<drivername>"  (e.g. "IPInterface_CWL350$")
> > Value: nummeric string from 0 to 7 specifying lan0 to lan7
> >
> > V2.0:
> > Application: "Wireless LAN Monitor:Bindings"
> > Keys: "<drivername>" (e.g. "CWL350$")
> > Value: nummeric string from 0 to 7 specifying lan0 to lan7
> >
> > Note that the V1.2 setting is not longer used with V2.0. If your system
> > does not carry the V2.0 setting, please let me know - then the automate=
d
> > determination of the binding failed.
>
> Christian, thanks for jumping in.
>
> Regedit2 shows the key "Wireless LAN Monitor:Bindings" in
> HINI_USER_PROFILE (OS2.INI). It has the following values and data:
> E100B$ 1
> PRISMP$ 0
> So, it seems that wxlan indeed finds the right settings.
>
> Any hints where to search, what data to report, etc?
>
> Best regards,
> Jeroen Besse

Well, I think I have a decent solution.
I removed the .11b miniPCI card, inserted a .11abg miniPCI card, and
installed the genmac 1.00 driver. Now things work as they did before,
except that I'm at 54Mbps now!

Many thanks to everyone involved in the 54Mbps project!!!

Now it's time to reinsert those 12 screws that stop letting my
Thinkpad fall apart... ;-)

Best regards,
Jeroen Besse
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=