| Da: |
Lewis G Rosenthal <os2-wireless_users@2rosenthals.com> |
Intestazioni complete
Messaggio non codificato |
| Mittente: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Oggetto: |
[OS2Wireless] A cisco-350 weirdness |
| Data: |
Sun, 31 Jul 2005 17:13:41 -0400 |
| A: |
os2-wireless_users@2rosenthals.com |
|
|---|
Sorry for the extremely late reply, Kris. Your reply got buried in my folder...
On 07/12/2005 07:24 pm, Kris Steenhaut thus wrote :
Do you have any MAC filtering enabled which would prevent the MAC address of the Cisco card from being granted access off the LAN?
No.
Okay, that's one item to cross off the list.
In XWLAN (and PROTOCOL.INI), which card is configured as LAN0, LAN1, LAN2, etc?
wired intel nic = lan 0
jacarando = lan1
cisco350 = lan2
When you switch cards, I'm assuming you tell XWLAN to switch to the other interface (LAN2, etc.).
Yep.
Looks like I have to start from scrtach again.
Not necessarily. This is sounding more and more like an arp or a default route problem. Are you using DHCP? If so, try opening an OS/2 window and:
arp -f <Enter>
route -f <Enter>
Then tell XWLAN to (re)configure the interface (when you have the Cisco card installed).
If you're not using DHCP, be sure that you have a default route entry for the Cisco card configured in XWLAN (Add/Edit Profile | {Profile Name} | TCP/IP tab | More TCP/IP Options button).
Now, supposing I'll rem out wired intel nic as well as the jacarando, how is the setup.cmd supposed to be? Or don't I need setup.cmd when using xwlan?
No need to fool with setup.cmd when using XWLAN.
Can you do a netstat -a and a netstat -r form an OS/2 window and post your results for both (with the Cisco card installed)?
--
Lewis
------------------------------------------------------------
Lewis G Rosenthal, CNA, CLE
Rosenthal & Rosenthal, LLC
Accountants / Network Consultants
New York / Northern Virginia www.2rosenthals.com
eComStation Consultants www.ecomstation.com
Novell Users International www.novell.com/linux/truth
Warpstock 2005 - Hershey, Pennsylvania, October 6-9, 2005 www.warpstock.org
------------------------------------------------------------
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|