Message-ID: <42A5A87E.1060202@rollanet.org>
User-Agent: Mozilla/5.0 (Windows; U; Win98; en-US; rv:1.7.8) Gecko/20050511
MIME-Version: 1.0
References: <20040822212843.6CF461C6500@postfix4-2.free.fr> <412923F3.C2EC2510@rollanet.org> <20050607033355-42847-7@2rosenthals.com>
In-Reply-To: <20050607033355-42847-7@2rosenthals.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Date:  Tue, 07 Jun 2005 09:00:30 -0500
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  Sam Lewis <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] Stuck at what looks like step One

I believe that I had a similar problem with IBM High Rate 128 on an 
older T20.  I installed Card Bus 8 to resolve it

 I currently use a Dell Latitude D600 and started with CB8 and then 
replaced the driver it loaded with the SS2PCIC2.SYS for my O2Micro 
chipset.  The one your using may be fine too I'm not really sure 
though.  The  installation on this laptop went without a hitch.

But at any rate I think CB8 may be the resolution here.

Also I would recommend disabling WEP and use WiFiStat and not the XWLAN 
thing until you get it working.
Sam

Will Honea wrote:

>Finally got access to the laptop today and it looks like I'm hung at step one. 
>Just to be sure, I installed the card under XP and it scans and identifies the
>AP by SSID, channel, and security mode so it appears to be a functional card
>(Cisco 350 from Lew).  Under OS/2, the Genprism drive loads and binds with no
>errors.  The PC Card Director (V5) detects the presence of the card (insertion,
>deletion) but that's about the end of the positives.  The PC Director status
>reports a staus of in but no IRQ, I/O, or memory resources are assigned. It
>reports the "Cisco Systems 350 series Wireless LAN Adapter" with an assigned
>Vcc of 0.0 V ??
>
>I suspect some out of date software here may play a part.  The copy of
>genprism.os2 I have is RC4 with a date of 11/01/2004, 43036 bytes. XWLAN
>(standalone) shows no card found. Tried the various things like moving like
>moving the device=$icpmos2.sys /G to the end, etc. The lantran.log with the
>debug setting at 0xFFFF below is what I get.  One thing that bothers me is the
>reference to the voltage settings, but I have no idea what it really means. 
>The antenna mode light is on, the status light gives an ocassional flicker and
>there is enough heat to indicate that there is power. I have no idea how to
>interpret the IOCTL errors so any suggestions would be appreciated.
>
>One oddity - this laptop uses the O2MICRO PCMCIA controller if that makes any
>difference.  I had a @#$%^&* of a time gettting a version of IBM2SSxx.sys that
>would run with it.
>
>  
>


Scanned by WinProxy
http://www.Ositis.com/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=