Message-Id: <20050607033355-42847-7@2rosenthals.com>
In-Reply-To: <412923F3.C2EC2510@rollanet.org>
References: <20040822212843.6CF461C6500@postfix4-2.free.fr> <412923F3.C2EC2510@rollanet.org>
MIME-Version: 1.0
Date:  Tue, 7 Jun 2005 01:33:48 -0600
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Will Honea" <os2-wireless_users@2rosenthals.com>
To:  os2-wireless_users@2rosenthals.com
Subject: [OS2Wireless] Stuck at what looks like step One

Finally got access to the laptop today and it looks like I'm hung at step one. 
Just to be sure, I installed the card under XP and it scans and identifies the
AP by SSID, channel, and security mode so it appears to be a functional card
(Cisco 350 from Lew).  Under OS/2, the Genprism drive loads and binds with no
errors.  The PC Card Director (V5) detects the presence of the card (insertion,
deletion) but that's about the end of the positives.  The PC Director status
reports a staus of in but no IRQ, I/O, or memory resources are assigned. It
reports the "Cisco Systems 350 series Wireless LAN Adapter" with an assigned
Vcc of 0.0 V ??

I suspect some out of date software here may play a part.  The copy of
genprism.os2 I have is RC4 with a date of 11/01/2004, 43036 bytes. XWLAN
(standalone) shows no card found. Tried the various things like moving like
moving the device=$icpmos2.sys /G to the end, etc. The lantran.log with the
debug setting at 0xFFFF below is what I get.  One thing that bothers me is the
reference to the voltage settings, but I have no idea what it really means. 
The antenna mode light is on, the status light gives an ocassional flicker and
there is enough heat to indicate that there is power. I have no idea how to
interpret the IOCTL errors so any suggestions would be appreciated.

One oddity - this laptop uses the O2MICRO PCMCIA controller if that makes any
difference.  I had a @#$%^&* of a time gettting a version of IBM2SSxx.sys that
would run with it.

-- 
Will Honea <hwj25@qwest.net>

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=