On Wed, Jun 01, 2005 at 11:10:42AM -0500, Sam Lewis wrote:
> Well here's my $.02 worth. I don't use a Wireless router, instead I use
> a PC with two NIC's as my router. But the principles are the same. You
> want to use the router mode. You want your ADSL part of the router to
> be a DHCP client and your ISP will assign an IP address to it, unless
> your ISP has given you a Static IP address, in that case you keep that
> IP address which is visible on the Internet. Then you can assign a
> Static IP address to your local Lan side of your network, popular Local
> IP ranges are 192.168.x.x or 10.0.x.x. Then you can turn on the DHCP
> Server in your router and setup your workstations as DHCP clients and
> your done. Your Gateway and maybe your DNS will be the routers static
> IP address you assigned to the Local Lan side.
> Hope this pertains to your case,
> Sam
This isn't how I want things at all. I have numerous real static IP
addresses which are available on my ethernet network and this arrangement
has been working for several years. I don't use DHCP at all. As I
understand it, my ADSL router is currently acting like a bridge between
the ADSL interface and the Ethernet interface.
What I can't figure out is how to incorporate WLAN into this.
Presumably the WLAN interface must also set up in bridge mode so would
have the same IP address as the the Ethernet interface. At this point my
mind goes blank since I can't figure out how this could possibly work.
--
John
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)