| Od: |
Jeroen Besse <os2-wireless_users@2rosenthals.com> |
Glava
Izvorno E-sporo?ilo |
| Pošiljalec: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Zadeva: |
[OS2Wireless] MPTS setup |
| Datum: |
Fri, 10 Feb 2006 09:08:02 +0100 |
| Za: |
os2-wireless_users@2rosenthals.com |
|
|---|
On 2/10/06, Ray Davison <raydav@charter.net> wrote:
> Jeroen Besse wrote:
> > For those who missed it, Adrian wrote somewhere else:
> >
> > upgrade to the latest version (not yet officialy released):
> >
> > ftp://netlabs:rulez@ftp.netlabs.org/ndis/genm15.zip
> >
> > simply replace the driver in ibmcom\macs
>
> That contains GENM32W.OS2. I removed the W and copied it over
> MACS\GENM32.OS2. That boots in green with:
> No valid entry in PROTOCOL.INI for WRND32$
>
> PROTOCOL.INI is below.
>
> Ray
>
>
> [PROT_MAN]
>
> DRIVERNAME = PROTMAN$
>
> [IBMLXCFG]
>
> netbeui_nif = netbeui.nif
> tcpbeui_nif = tcpbeui.nif
> tcpip_nif = tcpip.nif
> RTL8139_nif = RTL8139.NIF
> GENM32_nif = GENM32.NIF
>
> [NETBIOS]
>
> DriverName = netbios$
> ADAPTER1 = netbeui$,1
> ADAPTER2 = netbeui$,2
> ADAPTER0 = tcpbeui$,0
> ADAPTER3 = tcpbeui$,3
>
> [netbeui_nif]
>
> DriverName = netbeui$
> Bindings = ,RTL8139_nif,GENM32_nif
> ETHERAND_TYPE = "I"
> USEADDRREV = "YES"
> OS2TRACEMASK = 0x0
> SESSIONS = 130
> NCBS = 225
> NAMES = 21
> SELECTORS = 50
> USEMAXDATAGRAM = "YES"
> ADAPTRATE = 1000
> WINDOWERRORS = 0
> MAXDATARCV = 4168
> TI = 30000
> T1 = 1000
> T2 = 200
> MAXIN = 1
> MAXOUT = 1
> NETBIOSTIMEOUT = 500
> NETBIOSRETRIES = 3
> NAMECACHE = 1000
> RNDOPTION = 1
> PIGGYBACKACKS = 1
> DATAGRAMPACKETS = 50
> PACKETS = 300
> LOOPPACKETS = 8
> PIPELINE = 5
> MAXTRANSMITS = 6
> MINTRANSMITS = 2
> DLCRETRIES = 10
> FCPRIORITY = 5
> NETFLAGS = 0x0
>
> [tcpbeui_nif]
>
> DriverName = tcpbeui$
> Bindings = RTL8139_nif,,,GENM32_nif
> NODETYPE = "B-Node"
> OS2TRACEMASK = 0x0
> SESSIONS = 130
> NCBS = 225
> NAMES = 21
> SELECTORS = 15
> USEMAXDATAGRAM = "NO"
> NETBIOSTIMEOUT = 500
> NETBIOSRETRIES = 2
> NAMECACHE = 1000
> PURGECACHE = 0
> PRELOADCACHE = "NO"
> NAMESFILE = 0
> DATAGRAMPACKETS = 20
> PACKETS = 50
> ENABLEDNS = 0
> INTERFACERATE = 300
>
> [tcpip_nif]
>
> DriverName = TCPIP$
> Bindings = RTL8139_nif,,,GENM32_nif
>
> [RTL8139_nif]
>
> DriverName = RTSND$
> MEDIUM = "_AUTO"
> TXFIFO = 10
> NOIRQ = 0
> APM = 1
> CARDBUS = 0
> FLOWCONTROL = "TXA_RXA"
>
> [GENM32_nif]
>
> DriverName = GENM320$
> MEDIUMMODE = "AUTO"
The above tells me that genmac isn't installed right and/or MPTS isn't
configured right.
The steps are:
- install genmac100 through the install.cmd that is part of the package.
- start MPTS, choose the correct card (for instance, in my setup:
"GenMac Wrapper Atheros Wlan [168C:1014]").
Afterwards, protocol.ini should have something like:
[IBMLXCFG]
W168CX1014_nif = W168Cx1014.nif
AFAICS, it should _not_ contain a genm.nif.
Best regards,
Jeroen Besse
˙-˙-˙-˙-˙-˙-˙-˙-˙-˙-˙
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
˙-˙-˙-˙-˙-˙-˙-˙-˙-˙-˙
|