On 1/25/06, Ray Davison <raydav@charter.net> wrote:
> Jeroen Besse wrote:
> >
> > Every NETBIOS entry (whether or not over TCP/IP) should have its own
> > number. Your realtek uses numbers 0 and 1, on the wifi card, use
> > numbers 2 and 3.
> > Same for every (plain) TCP/IP entry. But you have unique numers there already.
> >
> > You might also have to alter IBMLAN.INI, as each (of the 4) NETBIOS
> > instances should have a corresponding NETx entry in IBMLAN.INI, if you
> > want Peer to use it.
> >
> > If you never use Peer or LAN Requester, you might want to consider to
> > remove all NETBIOS entries from MPTS.
>
> GenMAC seems to load OK.
> IBMLAN.INI now has:
>
> [networks]
>
> ; This information is read by the redirector at device initialization
> time.
> net1 = TCPBEUI$,0,LM10,34,100,14
> net2 = NETBEUI$,1,LM10,34,100,14
> net3 = NETBEUI$,2,LM10,34,100,14
> net4 = TCPBEUI$,3,LM10,34,100,14
>
> Entering the address of the router in Mozilla gets:
>
> The connection was refused when attempting to contact ...
IBMLAN.INI is not correlated to native TCP/IP apps like Mozilla.
For Mozilla to work, TCP/IP shout do it's thing.
You can enter this:
[C:\] netstat -a
to see whether each interface has an IP address assigned. "Interface
0" should be the Realtek interface, "Interface 1" should be the GenMac
interface.
(Do you use XWLAN?)
Best regards,
Jeroen Besse
˙-˙-˙-˙-˙-˙-˙-˙-˙-˙-˙
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
Nazaj na seznam