On 1/25/06, Ray Davison <raydav@charter.net> wrote:
> Internal Intel 2200BG
>
> Adapter and Protocol Config screen
>
> In the bottom window is:
> Realtek 8139
> 1-IBM OS/2 NETBIOS
> 0-IBM OS/2 NETBIOS OVER TCP/IP
> 0-IBM TCP/IP
> Mozilla is able to access the router by wire
>
> Selected MyWis. It appeared in the bottom window.
>
> Selected The three protocols above. they appeared as:
> 0-IBM OS/2 NETBIOS
> 1-IBM OS/2 NETBIOS OVER TCP/IP
> 1-IBM OS/2 TCP/IP
>
> Clicked OK. Error:
> LT00213: You cannot have duplicate logical adapter numbers
> for NetBios application support enabled protocol drivers.
>
> Change one or more of the logical adapter numbers.
>
> What are "the logical adapter numbers". Just what am I supposed to
> change.
Every NETBIOS entry (whether or not over TCP/IP) should have its own
number. Your realtek uses numbers 0 and 1, on the wifi card, use
numbers 2 and 3.
Same for every (plain) TCP/IP entry. But you have unique numers there already.
You might also have to alter IBMLAN.INI, as each (of the 4) NETBIOS
instances should have a corresponding NETx entry in IBMLAN.INI, if you
want Peer to use it.
If you never use Peer or LAN Requester, you might want to consider to
remove all NETBIOS entries from MPTS.
Best regards,
Jeroen Besse
˙-˙-˙-˙-˙-˙-˙-˙-˙-˙-˙
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
Nazaj na seznam