Gönderim Listesi os2-wireless_users@2rosenthals.com Ar?vli ?leti #2900 önceki ileti sonraki ileti listeye geri dön

Gönderen: Christian Langanke <os2-wireless_users@2rosenthals.com> Tam Ba?l?klar
Çözülmemi? ?leti
Gönderen: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Konu: [OS2Wireless] signal strength
Tarih: Fri, 06 Jan 2006 23:48:25 +0100
Alacak: os2-wireless_users@2rosenthals.com

Jeroen Besse wrote:

Hi,

I noticed that, with my Atheros card, the genmac100 driver and
xwlan212, the signal displayed is always between 60% (with change that
the signal is lost completely) and 90% (with the notebook 20cm away
from the access point).

Within Windows, the signal strength is reported with much more range;
I've seen working connections with a signal strength of around 20%.

Is this a bug in genmac100, in the Win driver used within that, or in xwlan?

 

Hi Jeroen,

the driver should report the signal strength within a certain value range, according to the NDIS interface specs, from -200 to -10. The genmac.dim converts that to a range of 0 to 190 and then to a range from 0 to 60, matching the DIM spec of XWLAN (taken from the genprism.dim),. This is calculated to a percentage where 60 matches 100%.

Since AFAIK the OID clal for the signal strength is returned by the driver directly. there cannot be a genmac error. My method of calculating may be wrong at some point, but I don't know where. If somebody knows a better scheme please tell me.

BTW, with the genprism driver and artem card, I also was able to use a 20% connection to get proper downloads etc.

Loosing the connection can also be a question of packet fragmentation, in rare cases either the driver on the client or the access point or both must be adjusted. I had such a problem that I could solve only by decreasing the fragmentation threshold on a former wlan router of mine to the default value of the WLAN router.

bye, Christian

-------------------------------------------------

Christian Langanke
COS2E & CWSE
Team OS/2 Ruhr e.V.
cla@clanganke.de

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Abone ol: Bildirim, Derleme, Fihrist.
Abonelikten ç?k
Liste Sorumlusuna Postala