** Reply to message from "Philip Nienhuis pr.nienhuis@hccnet.nl" on Sun, 01 Jan
2006 21:38:20 +0100

Got a first success in getting an "integrated" Intel PRO 2200BG Wlan adapter to work using Genmac 1.0 & XWLan 2.12 (thank you W. Meyer & C. Langanke!) under ECS 1.2.

I am have an Intel PRO 2100

To my surprise I find that Peer doesn't work, while TCP/IP works perfectly well. The requester exits with error code NET3060 ("The service did not respond to a control signal and was stopped with the DosKillProc function").

I have the same problem.  The first time I installed the requester would start
and peer would work on the wired LAN but not on the wireless.  Someone
suggested I switch from NETBIOS to NETBIOS over TCP.  When I switched then the
requester would not start so I switched back to NETBIOS but the requester still
will not start.  As a test I replaced the GENMAC driver with the IBMNUL driver.
With the IBMNUL driver the requester will start and work properly over the
wired LAN.  Replacing the IBMNUL driver with the GENMAC driver so I have
wireless connections brings the problem back.  So at this point I have wireless
access to the internet but can not connect to my gateway machine for the shared
files and printer.