[OS2Wireless] NETBIOS/NETBEUI Peer over GenMac/Intel 200BG
Datum:
Sun, 1 Jan 2006 14:19:44 -0800
Za:
os2-wireless_users@2rosenthals.com
** Reply to message from "Philip Nienhuis pr.nienhuis@hccnet.nl" on Sun, 01 Jan
2006 21:38:20 +0100
> Got a first success in getting an "integrated" Intel PRO 2200BG Wlan
> adapter to work using Genmac 1.0 & XWLan 2.12 (thank you W. Meyer & C.
> Langanke!) under ECS 1.2.
I am have an Intel PRO 2100
> To my surprise I find that Peer doesn't work, while TCP/IP works
> perfectly well. The requester exits with error code NET3060 ("The
> service did not respond to a control signal and was stopped with the
> DosKillProc function").
I have the same problem. The first time I installed the requester would start
and peer would work on the wired LAN but not on the wireless. Someone
suggested I switch from NETBIOS to NETBIOS over TCP. When I switched then the
requester would not start so I switched back to NETBIOS but the requester still
will not start. As a test I replaced the GENMAC driver with the IBMNUL driver.
With the IBMNUL driver the requester will start and work properly over the
wired LAN. Replacing the IBMNUL driver with the GENMAC driver so I have
wireless connections brings the problem back. So at this point I have wireless
access to the internet but can not connect to my gateway machine for the shared
files and printer.
--
Robert Blair
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
Nazaj na seznam