[OS2Wireless] NETBIOS/NETBEUI Peer over GenMac/Intel 200BG
Datum:
Sun, 01 Jan 2006 21:38:20 +0100
Za:
os2-wireless_users@2rosenthals.com
Hi,
Got a first success in getting an "integrated" Intel PRO 2200BG Wlan adapter to work using Genmac 1.0 & XWLan 2.12 (thank you W. Meyer & C. Langanke!) under ECS 1.2.
To my surprise I find that Peer doesn't work, while TCP/IP works perfectly well. The requester exits with error code NET3060 ("The service did not respond to a control signal and was stopped with the DosKillProc function").
Using the other built-in wired LAN connection (Intel PRO 100 using the driver supplied with ECS 1.2 - E100B?), Peer starts up fine.
My LAN uses plain TCP/IP for Internet & printing (HP printer server) and plain NETBIOS / NETBEUI for file sharing.
Am I right to suspect that XWLan will only setup TCP/IP connections but no (Peer over) plain NETBIOS....? (that is, I can't find any NETBIOS related setup info like host name etc. in XWLAN)
I haven't yet tried to connect w/o using XWlan, as the wifi LAN I'm using has WEP encryption. Using a Cisco 352 WLAN card, that WEP key had to be entered in MPTS (or entered manually in PROTOCOL.INI), but alas! the only place I found for entering a WEP key is in XWLan....
Any suggestions to get Peer over NETBIOS started? (I'd like to avoid TCPBEUI)
Philip
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
Nazaj na seznam