Message-Id: <20051230055133-14954-7@2rosenthals.com>
In-Reply-To: <4j9dcf$pkm9g@mail.asianet.co.th>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Date:  Fri, 30 Dec 2005 10:51:47 +0000 (GMT)
Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
Reply-To: os2-wireless_users@2rosenthals.com
From:  "Howard Winter" <os2-wireless_users@2rosenthals.com>
To:  "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>
Subject: [OS2Wireless] Cisco 350 card oddity

On Fri, 30 Dec 2005 12:08:39 +0700, Jeffrey Race wrote:

>...
>
>Why would her 600E show 0% signal strength with known good hardware? What to do?

A few possibilities occur to me (but I'm no expert!):

 - there's something wrong with the PCMCIA socket, or the card isn't plugged in properly
 - the card has its radio switched off
 - it's on the wrong channel and isn't finding the right one for some reason
 - the software is setting it to use only US channels (1-11) but the AP is using one of the others (12-14)
 - it is looking for the wrong SSID, and/or the wrong encryption scheme (although thinking about it I don't 
think this would show no signal)

Best of luck!


Howard Winter
The H2Org
http://www.ecomstation.co.uk


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=